Jump to content
SAU Community

Recommended Posts

Quality cars, my opinion was swayed after driving one!

Swayed in which direction? I drove it straight after driving my Skyline, I couldn't get over how tight and short the gearbox was a how short the clutch throw was. Handled amazingly, unfortunately the paint wasn't as good as I had hoped and the soft top was not so soft... More dry and crumbly

Want me to pick you up on my bike Leigh?

Too soon?

f**ker lol

I was looking at bike rego costs 500cc and over is just over 600 now.. Think I might get a husky 511 (they're actually 480cc) brembos 118kg and 50-60hp $450 rego better

Although do like r6

Swayed in which direction? I drove it straight after driving my Skyline, I couldn't get over how tight and short the gearbox was a how short the clutch throw was. Handled amazingly, unfortunately the paint wasn't as good as I had hoped and the soft top was not so soft... More dry and crumbly

Positively...I never thought they were bad cars, but didn't think anything special until I drove. Basically a big go kart and loads of fun. Gotta give them revs to get them going, but still better in traffic than turbo lag.

I was looking at bike rego costs 500cc and over is just over 600 now.. Think I might get a husky 511 (they're actually 480cc) brembos 118kg and 50-60hp $450 rego better

Although do like r6

Didn't know rego depended on displacement :(

R6 for sure! Though...if you can stomach the looks, the GSX-R600 is the fastest accelerating middleweight...it's marginally slower than an R1 to 100 :O

saw last night an orange gallardo followed by a white modded c63 followed by a white gallardo with green/red stripe driven by a little asian chick on russel st.

asians in all 3....

i died a little inside.

When will it be my turn...?

That's why I got one, can't beat them for the price. Speaking of, that's the best price and mileage I've seen on an 08 since mine...buy it nao.

lol there was an r6 doing "prinny" laps last night with all the bogans

serviced the 2fiddy

sump plug wouldn't tighten properly so i put some sealant on it...

hoping for the best/expecting the worst

When will it be my turn...?

least you'll have a turn :closedeyes:

serviced the 2fiddy

sump plug wouldn't tighten properly so i put some sealant on it...

hoping for the best/expecting the worst

Careful with that one Rimmy, and make sure you check your oil level / for oil leaks before every ride. People have lost their engine oil half way through a ride before, engine seized, come off the bike and died :(

All the little issues with car engines are big issues for bikes :/

Careful with that one Rimmy, and make sure you check your oil level / for oil leaks before every ride. People have lost their engine oil half way through a ride before, engine seized, come off the bike and died :(

All the little issues with car engines are big issues for bikes :/

No idea how to check oil level lol I know it takes 2.6l so I just put it in that much

I started/reved it there are no leaks

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...