Jump to content
SAU Community

Recommended Posts

dw, fifo ymcmb

you can afford it

bahahaha

Lol what good is more money when you waste it. End up in the same spot :P

Received email from telco confirming our discussion. Says to contact if any questions. Is there any more I can ask for or game over?

Lol what good is more money when you waste it. End up in the same spot :P

Received email from telco confirming our discussion. Says to contact if any questions. Is there any more I can ask for or game over?

Maybe a payment plan if you want to piss them off :D

Did you end up going the solar panel route?

Just got 5kw system done to our house. Was around 6.5k? Not bad

House next door has a 2.5kw and says its not enough, they're 60-70yo couple. But I dont know how they use their power

Did you end up going the solar panel route?

Just got 5kw system done to our house. Was around 6.5k? Not bad

House next door has a 2.5kw and says its not enough, they're 60-70yo couple. But I dont know how they use their power

Parents got one at their house... Bills have reduced a fair bit I believe, will pay itself off eventually but not sure when... If the Govt. keep the feed-in rebates up past 2016 it'll pay itself off sooner

My parents just got 8kw system, will see how the next bill. Got it for 8k with a supposedly free ipad mini or $300 cash back... dad asked for the ipad mini thinking it'll be cool. -__-
Still waiting for the first bill to see what difference.

My parents just got 8kw system, will see how the next bill. Got it for 8k with a supposedly free ipad mini or $300 cash back... dad asked for the ipad mini thinking it'll be cool. -__-

Still waiting for the first bill to see what difference.

LOL. You probably bought it from the company my mum got it from. Hahahahahahahaha. Was the sales man a viet lad?

Mum took the 300 off.

Shieeeet. Our roof aint big enough for 8kw. Hopefully 5kw is enough for us

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...