Jump to content
SAU Community

Recommended Posts

If listed all the go fast bits on my car, people would think AMAGAD BUILD THREAD??? but it performs rather.. averagely.

Not bad, just averagely.

It has Tomei type B's in it (engine is 2.8L), adjustable cam gears, and I'm not 100% certain that it's all the way it should be. It probably isn't actually wrong, but I doubt it's completely right so it'll bug me until it's checked.

I've also read many places on SAU that having an adjustable exhaust cam gear is of benefit. So I got one, with my cams, and no one has ever actually adjusted it to see if it does anything. Just a "she'll be right mate its designed to be on +0" in which case why even make the item?

Fair enough, have you had opinions from the tuners etc..?

Is it currently with a reputable workshop?

Curious to know which one its at. PM it if you want to keep the workshop private

bahahahah.

they are race cams for the 1.3 in the micra..... going stupidly cheap. but i dont know enough about duration/lift etc to even contemplate buying them....

I could ask a mate if you REALLY wanted to know....

bahahahah.

they are race cams for the 1.3 in the micra..... going stupidly cheap. but i dont know enough about duration/lift etc to even contemplate buying them....

race cams for race head or just OEM head???

If OEM will certainly requiring machining. That's about all I know.......and IF I'm wrong well my disclaimer is this.......kiss my French something something dark-side :P

i have consulted the guru of all that is micra.

ghettofrank.

hopefully he should get back to me when he wakes up, but from what im reading your right ants...

this is tomei poncam spec. http://www.rhdjapan.com/tomei-camshafts-procam-poncam-cg13de.html

the engine it came out of must have been mental.

just be wary: procam is for solid lifters. poncam is for hydraulic. anything bigger than 280-290 degrees... you'd want solid.

Dont know much about those engines, but cams that big is like "I need to wait 15mins for my car to warm up before its possible to drive it under 40km/h" and the "my car doesnt make power less than 4krpm"

just be wary: procam is for solid lifters. poncam is for hydraulic. anything bigger than 280-290 degrees... you'd want solid.

Dont know much about those engines, but cams that big is like "I need to wait 15mins for my car to warm up before its possible to drive it under 40km/h" and the "my car doesnt make power less than 4krpm"

thanks man. will leave them the f**k alone then.

Seems to be some car enthusiasts on my street, there's been beemers, mercs, and now micra project cars in the carport.

give that micra kent a shout and see if he has any parts!

where you live?

Who needs a daily?

I have a workmate selling a 1995 integra Type R for ~ $2k with RWC

f**k me your kidding?

would have loved that 3 months ago.

prob would still buy if i had sold the clubby.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...