Jump to content
SAU Community

Recommended Posts

scotty, my cut n shut sumps leaking, has a shit weld in one spot. ive put some JB weld to get me through.

reckon you could weld it for me while its still in the car? just one spot.

<3

i cum 2 yu

n i cum on yu

Can't be welded in situ, the oil will stop the weld from sealing. It needs to be thoroughly cleaned and ground back, even then it probably won't stick, as the previous welded found out the hard way.

you're asking me about hotels?

lol. i'll honestly say, don't know, but location is good.

Good location thats all i need to know

Wanted to stay at Orchard rd area but a bit exy

One day I'l stay at the Marina Bay sands when I'm a high roller

marina-bay-sands.jpg

Are people allowed to go into that hotel up to the top for fun? Or you need to be a guest/pay etc..?

Good location thats all i need to know

Wanted to stay at Orchard rd area but a bit exy

One day I'l stay at the Marina Bay sands when I'm a high roller

marina-bay-sands.jpg

Are people allowed to go into that hotel up to the top for fun? Or you need to be a guest/pay etc..?

i think you're allowed to go up. i'll ask my sister when she's back from china, she da high roller.

meanwhile entry into the casino costs $100 for singaporeans. lol.

i think you're allowed to go up. i'll ask my sister when she's back from china, she da high roller.

meanwhile entry into the casino costs $100 for singaporeans. lol.

Wuuttt. So you need to pay to get in to lose your money lol

What are the must do's in Singapore?

What's that, a 4 inch tip? I thought you wanted pea shooter...

i do. but its nismo man. to say they had a single make race for the nismo k11's there isnt much shit left off them.

scotty, my cut n shut sumps leaking, has a shit weld in one spot. ive put some JB weld to get me through.

reckon you could weld it for me while its still in the car? just one spot.

<3

i cum 2 yu

n i cum on yu

WHAT DID I TELL YOU TO DO WITH THAT SUMP...?

I remember i SPECIFICALLY told you to let it sit for a day or 2 filled with water to see if it leaks.

did you do it?

guess not

old airport road hawker centre.

shopping?

see MBS, universal studios, our gardens by the bay,

singapore airport, spend as much time behind the customs gates, because it's that awesome.

and yes, can pay to go to rooftop bar at marina bay sands, but not allowed in pool unless guest

Thanks Guis!

WHAT DID I TELL YOU TO DO WITH THAT SUMP...?

I remember i SPECIFICALLY told you to let it sit for a day or 2 filled with water to see if it leaks.

did you do it?

guess not

Poor Moh, learning the hard way yet again. lol.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...