Jump to content
SAU Community

Recommended Posts

The problem is individuals owning a VW as far as those whom I know love to stick their noses in the air and associate it as a "prestige" and therefore better which is generally not the case. In addition to the tuning etc. made to the engine and thinking that they have superior performance/reliability as opposed to japanese cars, assuming that you're not trashing the shit out of your jap car.

Regarding the leaning out thing, it's because they made it readily available and marketed it and made it mainstream, people don't realise the harm they are doing to their cars and take them to a VW service centre which are probably going to use sub-par oils/fluids that are not made for the increase in power obtained from the aggressive tune, not to forget, stock internals.

Anything above 227 hp (not much room to play with) from a stock GTI engine is going to cause problems, APR stage 1 gets you 254 hp, way above the limit for the stock engine. The Audi TTS which has 265 hp has the same 2.0L I4 engine reinforced from factory, if the engineers from Audi thinks that a reinforced engine is required to take that sort of horsepower, what makes you think that APR's claims that they are tuning it within the limits of a stock GTI engine without any reinforcements are true? Furthermore, every 2.0L i4 engine from VW that produces more or equal to 169kw's of power comes with reinforcements made to the internals. I think their engineers know what's good for their own engines and what isn't.

4th paragraph from: http://www.caranddriver.com/reviews/2010-audi-tts-road-test-review highlights the reinforcement of the engine internals from the 2.0L i4 engine to accommodate the increase in power from the tune/turbo upgrade.

But meh, at the end of the day, I just hate it when people judge you for driving a japanese car when they drive a european one. It's not the car, just the driver's that reek of elitism that annoys me :P , and my advice to any potential/current GTI owners, please just keep the engine stock or face reliability issues down the road, unless you're going to reinforce the internals :thumbsup: then go crazy!! :banana:

Edit:

Yes it is xD polo's too are pretty affordable hatches too nowadays (plus it's european :rofl2:) , good for transporting stuff around :yes:

Seriously cbf responding to any of that. Im not here to argue. A lot of work went into that post ;)

the issue is never the HP, its the torque.

limiting torque during the lower/mid rpm band and then increasing it in the upper rev band can do wonders for keeping a not so tough bottom end alive while still giving you a look at me hp figure.

Seriously cbf responding to any of that. Im not here to argue. A lot of work went into that post ;)

Don't tune your GTI and don't be like one of them snobbish GTI owners :P but it's a cute little hatch no doubt. Buuut meh.. it's a girls car imo, but that's just me! :laugh:

the issue is never the HP, its the torque.

limiting torque during the lower/mid rpm band and then increasing it in the upper rev band can do wonders for keeping a not so tough bottom end alive while still giving you a look at me hp figure.

Anything above 169kw and 300nm then :woot:

Edit:

VW's are probably not shit, but their owners are making them shit. And their owners that are making them shit are retarded.

^

Edited by arcenite

Don't tune your GTI and don't be like one of them snobbish GTI owners :P but it's a cute little hatch no doubt. Buuut meh.. it's a girls car imo, but that's just me! :laugh:

crapping out at a mere 300nm is fairly pez. tbh, thats not a lot of safety fat left in it by VW, again its engineered to do the job and not much beyond.

which is likely the same issue they are running into with the DSG boxes, yes they work, but if its engineered with the same slim margins any increase or abuse/hard usage starts having a big impact on how long it will last.

I drive a vw jetta, I've never thought of it as a prestige car...just don't get that feeling, especially because it's a fwd tractor and the interior is so plain imo. :/ if i had the choice i'd take my 34 back in an instant.

Honda is best.

Sadly the s2000 was shunned and people would rather be seen in a z4 :ermm:

crapping out at a mere 300nm is fairly pez. tbh, thats not a lot of safety fat left in it by VW, again its engineered to do the job and not much beyond.

which is likely the same issue they are running into with the DSG boxes, yes they work, but if its engineered with the same slim margins any increase or abuse/hard usage starts having a big impact on how long it will last.

Yeah those dsg boxes are a no-no if you're going to drive it hard, they wear out pretty quickly, then you'll have to deal with the cost of european parts... :unsure:

Edit: I hate it when people say, "It's just a Honda" when they refer to the s2000 :rant: when comparing it to the z4.

Edited by arcenite
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...