Jump to content
SAU Community

Recommended Posts

Hi i have rebuilt my r33 rb25 engine and it is up for its first oil change.

Mods full forged bottom end nitto oil pump

I have read many threads on which oil to use i went to my local autobarn and they wanted to sell me

Royal Purple oil which i think had traces of GOLD in it or at least its price reflected that he also said that i could get 10,000kms

between oil changes i think he was full of ####.

Most other places dont even have r33 skyline listed.

Is there any benifit in using full synth oil over semi synth and so many different grades i dont mind paying extra for the right oil that

is suitable for australian conditions i just want to start off with 1 brand and type/grade of oil and keep it that way.

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/
Share on other sites

Street driving i run Penrite HPR10-50 $45ish

When im on the circuit i run RedLine 10-50 $120 for 6L

No matter how good quality te oil is i change it before a track day, then back to Penrite after the track.

Keep it fresh.

What sort of driving do u have planned?

Did u fit a bigger/baffled sump

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6086317
Share on other sites

Hi ill be using it mainly street driving maybe an occasional trip to the drags with a couple of friends

and i have a std sump not a aftermarket baffled sump i do have 1 oil feed to the head blocked as

this was recomended to me as i was installing the nitto pump. I used to change my oil and filter every

5000kms and i used nulon full synthetic oil previously.

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6087012
Share on other sites

read the thread at the top of this section, maybe start from the end

i run the gulf western semi-synth stuff

$33/5litres, and it runs though my stagea better than the nulon did, nulon made my top end a little noisy

i know a lot of people bag it out, most of those ppl have never used it

at the end of the day it comes down to personal preference, but royalpurple will last 10,000kms as will many oils

if your gonna do 5,000km changes (i do too, gw oil gets dark quickly, which means its working) use something decent but not too exxy

iu used to run penrite but found gw both are good IMHO, penrite lost me when they added all this "extra 10" nonsense

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6087122
Share on other sites

http://www.animegame...Oil%20Tests.pdf

This article should make it easier

http://www.streetcommodores.com.au/news/01_oils_aint_oils.php

You may want to edit out the link to that oil test article that even street commodores admitted that it was irrelevant, unless you like looking like an idiot.

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6094921
Share on other sites

Hi thanks to all whq replied to my pst i have done my first oil change and i have gone with

Castol Edge 10w 60 synthetic with advertised additives the local autobarn and not so

cheap have a limited selection cost $73.00 did notice staight away increase in oil pressure

with engine hot at idle i think i will give this a go for a while

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6096498
Share on other sites

I didn't like Castrol edge in my car. think i was running 10w40 and the oil pressure was to high for my liking on a cold day. switched back to motul 8100 x-cess at next service

I have a autometer electronic oil pressure gauge what should the pressure be at warm idle mine tends to be around 20psi last tine I checked as I don't drive the car to often

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6099166
Share on other sites

  • 3 weeks later...

Hi i have rebuilt my r33 rb25 engine and it is up for its first oil change.

Mods full forged bottom end nitto oil pump

I have read many threads on which oil to use i went to my local autobarn and they wanted to sell me

Royal Purple oil which i think had traces of GOLD in it or at least its price reflected that he also said that i could get 10,000kms

between oil changes i think he was full of ####.

Most other places dont even have r33 skyline listed.

Is there any benifit in using full synth oil over semi synth and so many different grades i dont mind paying extra for the right oil that

is suitable for australian conditions i just want to start off with 1 brand and type/grade of oil and keep it that way.

I would recommend redline 10w40 and run it for 10-15k just change the filter every 5000 max.

Works out a lot cheaper than putting cheap stuff in every 5k. This is only for street driving.

On the track use the same oil just change it after racing.

Not sure what you mean by Australian conditions, inside an engine is the same wherever you are.

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6123033
Share on other sites

Spot on

Be cause the ambient temps are much higher than in say Europe or a jap mountain our motors are more likely to see higher oil and coolant temps

What ya gonna do? Use a slightly thicker oil (probably on one weight higher)

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6123990
Share on other sites

That's it Im using a oil for the first time united1 10w50 one of blokes here in WA works for united oil and uses it in his race car with no problems at all my temps sit lower than ever and we currently facing 37 degree days at the moment

Link to comment
https://www.sau.com.au/forums/topic/381652-which-oil/#findComment-6124531
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...