Jump to content
SAU Community

Recommended Posts

Hey guys,

I just put on order a whole bunch of goodies for my 34:

Garrett GTX3076R

Z32 AFM

Bosch 040 Fuel pump

Return Flow FMIC

Soon to come

Nistune board

Insert suggested injectors here (Sard 600?)

Im going to do the install myself with the help of a mate and Im trying to find if anyone has done a 3076 low mount with the return flow intercooler, Just looking for some pics so I can get an idea of what I'll need to do as far as the piping goes. The car is a daily so Its probably going to be a bit of a mission to get it done but Im sure it'll be worth it.

Cheers

S

Link to comment
https://www.sau.com.au/forums/topic/381709-gtx3076r-on-r34gtt/
Share on other sites

What size rear housing is the turbo? Internal or external gate? If your using the stock manifold, you'll need a 10mm steel spacer, to space the turbo of the manifold as it will foul.

Whats the car to be used for? Street driving?

Your power goal and the fuel it runs on will determine your injector sizes as a rough guide. At the power your making, you dont want to push the injector duty cycle past 80%.

Awesome info kitto it's a .82 housing internally gated I had heard about the spacer but wasn't sure. The dealer I bought it from is looking into that for me. I'm aiming at 320 kw in the future but not right away. main use is street driving occasionally spirited and I want to start doing some track days for a bit of fun

Ah ok, from what i have personally seen and been in. The .82 rear housing tends to be a bit laggy on an RB25. Especially if your not using an EBC.

However, the first RB25 was using a GT3076 not a GTX. This doesn't make a lot of difference at all, but just a slight amount. This engine was a non NEO engine aswell using BP98 making .347 Hub kW.

The second RB25 is a NEO engine, on E85, .63 rear housed GTX3076R making 368kW on the same hub dyno. Its Simon Michelmore's S14. He's had awesome results with the GTX3076R with a .63 rear housing

Both engines were also using steam pipe high mount manifolds which do make a difference.

Running lower boost pressure may cause the boost pressure to spike as the internal waste gate can't get rid of the large amounts of exhaust gas at lower boost levels.

It will do 320kW easily. What fuel are you going to use? E85 or BP98? This will choose your injector size.

NIStune - I like it!

i wouldnt count on making 320rwkw with an internal gate turbo on the stock manifold on 98. sure it happens, but most people fall well short. realistically you'll be limited to around 260-300rwkw depending on various factors. the standard manifold also makes the gtx3076 overkill compressor wise, better off with a standard gt3076.

as for injectors if you can find a set of nismos for sale at a decent price go for them. otherwise theres a few other bolt in options, plenty of info on here if you do a search.

as for bolting it onto the stock manifold, you'll need a 10mm spacer as said, along with longer studs, nuts and washers, custom dump, oil and water lines, cooler pipe mods and a custom intake pipe.

You actually need a 20mm spacer for the 3076's. The 3071's only need a 10mm spacer.

i wouldnt count on making 320rwkw with an internal gate turbo on the stock manifold on 98. sure it happens, but most people fall well short. realistically you'll be limited to around 260-300rwkw depending on various factors. the standard manifold also makes the gtx3076 overkill compressor wise, better off with a standard gt3076.

as for injectors if you can find a set of nismos for sale at a decent price go for them. otherwise theres a few other bolt in options, plenty of info on here if you do a search.

as for bolting it onto the stock manifold, you'll need a 10mm spacer as said, along with longer studs, nuts and washers, custom dump, oil and water lines, cooler pipe mods and a custom intake pipe.

No you dont.

You need a 10mm spacer and extended studs.

I have a 3076 .82 on my RB25, with a Blttz Return flow. the turbine outlet pipe needs to be extended about 220mm.

Heres a pic of my stock pipes modded to suit. (top pipe, you can see the extension welded on.

IMG00610-20110802-1710-1.jpg

DSCF0964.jpg

If you trim about 40mm off the stock manifold heat shield you can get that to slot back on too.

DSCF0962-1.jpg

And dont listen to anyone that says a .82 is laggy on an RB25. They dont know what they are talking about. You will love it to bits. Enjoy :)

Edited by gotRICE?

Im running the GTX3071 with .82 rear housing .60 front in second gear at 4000rpm the lil 25 really starts to boogey all the way up to 7500rpm i was worried bout the lag just like you were mate and i have no regrets bout the .82 its a great street setup its not hugely laggy but pulls like a freight train! :)

Still waiting to get some more info for you Lith but the head gasket leaked into number 5 on Friday while on the dyno. It will be another 4-5 weeks until I get it back on there. They were well into tuning by then so there could be some preliminary results to overlay with Mick_o's car when he gets back to the tuner.

Ill be running 98PULP, maybe avgas, shouldn't be too difficult for me to get. I will be getting an EBC (like the look of the AVC-R) down the track but might go with a boost tee or similar in the interim. Damn lack of funding!!

JonnoHR31, Is that a custom suction pipe or can you buy them or something similar?

Im actually not 100% sure lith but im pretty sure 21psi in 3rd gear is around 3500-3700 max and 4th gear is unknown mate my car is supposed to be hitting the rollers thursday so keep ya eyes peeled in my GTX3071 thread mate to check out my dyno sheet. Wolverine actually drove my car the other day and was of the opinion there was a little more to be had down low. So fingers crossed hes right

When do you get full boost in higher gears? I've been really interested in the difference in overall performance between a GTX3071R and a GT3076R :)

heres what i used for the piping mate :thumbsup: .'-

Suction line/air filter line

4'' - 3'' silicone reducer

3'' 90 degree elbow

3" 45 degree silicone bend

TURBO OUTLET LINE

A 2.5"-2" reduced silicone 90 degree bend

2 x 2.5" 45 degree bends

Thats pretty much all i used as well as a short piece of 1" pipe for my blow off valve plumback line and a piece of 3/4" for the rocker cover breather line :whistling:

Garrett GTX3076R

Z32 AFM

Bosch 040 Fuel pump

Return Flow FMIC

Soon to come

Nistune board

Insert suggested injectors here (Sard 600?)

Im going to do the install myself with the help of a mate and Im trying to find if anyone has done a 3076 low mount with the return flow intercooler, Just looking for some pics so I can get an idea of what I'll need to do as far as the piping goes. The car is a daily so Its probably going to be a bit of a mission to get it done but Im sure it'll be worth it.

Cheers

S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...