Jump to content
SAU Community

Recommended Posts

all of a sudden today the airbag light on the dash cluster started flashing.

i tried the ignition on and of 5 times thing. the first time the light just started flashing all random, second time it just went back to flashing...

is it safe to drive till i get it in to nissan to be looked at?

will all nissan dealers be able to plug in to read the codes? im on the south side (logan) best location to take it???

cheers

Link to comment
https://www.sau.com.au/forums/topic/381924-air-bag-light-flashing/
Share on other sites

Two months ago, my V35 Airbag light started flashing. I did the reset procedure and it hasn't come back on since.

It seems quite common in Nissans to get false positives but if you've done the reset procedure correctly, definitely get it checked out

Edited by o2bfit
  • 8 months later...
  • 2 weeks later...

well mine keeps coming back on. 2004 sedan . I did the procedure 3 times now. and it comes back after a while. does anybody know what might need replacing? air bag modules? doe sthe g35 part work

There is no way we can answer that question. you need to have the airbag codes read to find out what it triggering the light.

The anti-submarine units in the seats seem to be a common issue, but until you get the codes read, you won't know for sure.

From what i have heard, you can't buy these units separate from the seat.

Edited by sonicii

thats what i got told too....apparently its a two yellow cords under the seat that get stretched or pulled out (couldnt quite hear the guy as the signal was crap over the phone) but i did the on off trick and it hasnt come back....yet

  • 4 months later...

Can someone advise me on how to reset the airbag light flashing? It is not really that clear how to fix it from what I have read here. I had a new car stereo put in yesterday & now all of a sudden the airbag light is flashing.

Method A:

1) Turn IGNITION on (but don't start car)

2) After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.

3) Wait 4 seconds

4) Turn IGNITION on (but don't start car)

5) After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.

6) Wait 4 seconds

7) Turn IGNITION on (but don't start car)

8) After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.

9) Wait 4 seconds

10) Turn IGNITION on (but don't start car)

11) Wait 3 seconds

12) Turn IGNITION off

13) Wait 2 seconds

14) START Car (the light may be blinking slower than before)

15) Wait 3 seconds

16) Turn IGNITION off

17) Wait 3 seconds

18) START Car

Method B:

To reset the light simply turn the iginition to the on position, (you dont need to start it). All the lights should stay on for thier diagnostic check. As soon as the airbag light goes off, before it starts flashing, immeditatly turn the car off. Repeat this 3 or 4 times (turning to on then off) and the light should go away

Sourced from G35Driver - Thanks G35man04 and SFLG35

http://g35driver.com/forums/repairing-detailing-diy/163319-diy-airbag-reset-instructions-03-07-g35-coupe.html

  • 4 months later...
  • 1 year later...

clearing the error only treats the symptom, not the cause.

You need to find out what is triggering the error.

The unit under my passenger seat was causing problems with mine, the light would come on once every couple of months. I tried cleaning the connectors and cable tieing the wiring in place, none of this worked.

I ended up dismantling each connector and soldering the wiring into the connector pins, cleaning up the pins and re-assembling. I haven't had a problem in over 6 months now.

I would offer to help, but I have no idea where you are located James. You need to get it on a Consult 3, even the above procedure doesn't work often to reset the light, and the code is still logged in the ecu.

I think all have the unit under the seat. it isn't an airbag in the traditional sence, but more of an 'anti submarine' device which stops you sliding out underneath your seatbelt in an accident, but it is still part of the airbag system, so will throw the same warning light if there is an issue.

Anti submarine rams... I have yet to see these. How many yellow wires were under there?

All the cars I have worked on had only one pair of yellow wires, and these just go to the switch under the seat to tell the airbag module there is a person sitting in the seat.

They are on mine, and I probably made a bad assumption that they all have them.

I have completly stripped my drivers seat to repair the broken lifter bracket and there is no switches, just a long tube across the front of the seat with airbag/explosive warnings on it, and a single yellow harness, but from memory, it had more than 2 wires.

The passenger side has the same thing. Although I haven't stripped the passenger side seat to the same extent as the drivers side, the module and harness looks the same.

Edited by sonicii

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...