Jump to content
SAU Community

Recommended Posts

First thread start in this section so please be gentle.

Thinking about track/race only R32/R33/R34 GTR's with no 4WD... is the trade off between the weight lost at the front without the front diff., drive shafts and also transfer case behind the gearbox be a greater advantage over the 4WD grip?

When you consider when you remove the front sump/diff. you could fit a custom shallow dry sump oil pan, without the transfer case you could fit a ex-Supertaxi seq. box without worrying about the transfer case.

The GT cars in Japan were all rear wheel drive only be it for rules or reliability.

What are peoples thoughts?

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Why mutilate a waste you're money on a gtr. Get a gtst

Congratulations on being the first to make that comment but not the intention of the thread.

We are talking about a GTR with less weight at the front (50-100kg?) dry sump with lowered engine (lower COG), no t/case... maybe a seq. gearbox too. In comparison with a similar spec. GTR with 4WD and the additional weight associated... same power i.e. 600hp.

The GTR 33-34 have a much better set up than a gtst STD . They have better suspension uprights on the front alloy rear hubs better guards to swallow massive wheels and I am sure the chassis has a lot of other little bits that make it better than a gtst. A gtr chassis in rwd would be great expessially with nice engine package. Quicker? Fun yes :-)

nope.

kw for kw, tyre for tyre, brake for brake etc etc everything identical, the 4wd will beat the 100kg lighter 2wd because it can get out of 2/3rd gear corners faster by putting more power to the ground and doesn't give that much away by the end of the straight or in the braking zone. Maybe if we were talking closer to 200kg difference i'd change my mind.

Find a 3/4 gear track and they are getting closer

Find a 4/5/6 gear track and the lighter car might just sneak in front.

But for such a small difference in weight on most Australian tracks, nope.

nope.

kw for kw, tyre for tyre, brake for brake etc etc everything identical, the 4wd will beat the 100kg lighter 2wd because it can get out of 2/3rd gear corners faster by putting more power to the ground and doesn't give that much away by the end of the straight or in the braking zone. Maybe if we were talking closer to 200kg difference i'd change my mind.

Find a 3/4 gear track and they are getting closer

Find a 4/5/6 gear track and the lighter car might just sneak in front.

But for such a small difference in weight on most Australian tracks, nope.

Great input... thanks

This thead is right up my alley :)

Have a read of this article done by Autocult.net on me and my car.

http://autocult.net/

Interesting... would you be as fast or faster as a R32 GTR with the same power? I recognise that there are a lot of other differences.

Sorry but I do not know a lot about track times and what is good where.

Have you weighed your car Russ?

I'd be taking a rough guess that you'd be around 250-300kg lighter than say Chris/Ant who are still full weight GTRs?

(group visit to the weight bridge! haha)

Interesting... would you be as fast or faster as a R32 GTR with the same power? I recognise that there are a lot of other differences.

Sorry but I do not know a lot about track times and what is good where.

Short answer is yes.

Like Ash has said I'm approx 200kg lighter and about 60kw less than most Vic GTR's and we are neck and neck.

Upside is that I use less tyres, brakes etc to do it! Mid corner is faster too which is what I reckon is the most fun.

Have you weighed your car Russ?

Haven't had it weighed but it's not that lightened. Sound deadening, air con etc gone but has a heavy cage put back in so it's only just lighter than standard I reckon.

Let me apologise to the forum police.

This is specific to the motorsport guys with genuine experience and semi/professional opinion not a bunch of teenagers who want to drift their GTR or do burnouts.

touchy aren't you, did you read the first thread?

let me quote it for you.

Hey guys,

I have this theory which I base my car around: That in the long run with a decent budget on the car, an R32 GTS-T will be faster around the track than it's flagship brother; the R32 GTR (assuming both with the same RB26 engine). This is because of these factors:

- GTS-T is lighter and better front to rear weight balance.

- With modifications the GTS-T will be further lighter.

- The R32 GTR has the most understeer and eliminating that will provide more potential.

- GTS-T will have faster turn in from lighter front.

- An AWD system is only used for additional traction so if aero parts are in and modified correctly then the extra weight of AWD is not needed.

- R32 AWD system too primitive.

- More fun around the track.

- Cheaper.

There is a reason all the JGTC and GT class Skylines are all RWD, I'm sure it's from the fact that from long term modification, the AWD system is no longer needed. If you look at the statistics, the GTS-T is already 110kg lighter than the GTR (standard eninges), and whatever you can do to the GTR you can do to the GTS-T. Now before anyone starts flaming, I'm not hating on the GTRs but I dare you guys to prove me wrong on this.

Statistics:

R32 GTR

Curb weight: 1430kg

Drivetrain: F4

Track width front and rear: 1480mm / 1480mm

Wheelbase: 2615mm

Suspension: Independent multi-link

R32 GTS-T

Curb weight: 1320kg

Drivetrain: FR

Track width front and rear: 1460mm / 1460mm

Wheelbase: 2615mm

Suspension: Independant multi-link

umad?

Been here done most of that......

My old R32 GTR which was raced not just tracked had a terrible issue smashing front diffs off the grid.

I'd get the first race down and the rest of the weekend would be spent with a crownwheel floating around in the front diff.

The car would be very difficult to drive when the front diff would first let go. After some chassis work to make livable I would end up leaving the front diff broken for the rest of the weekends

Nothing else would change just no front diff.

As a RWD car I'd have some trouble getting pace into it for the first couple of laps but once it was settled in there was virtually no difference in the cars pace If you drove it like a RWD and were patient on the throttle.

I have that chassis pretty sorted and alot of work had gone into it.

I can't see why if you removed the front sump, transfer case, attessa pumps/resivour, front drive shafts, prop shaft etc that exact car would not be quicker.

Straight line speed would increase, braking ability would increase( not that it needs to be any better) acceleration would actually increase (providing it's driven accordingly and set up correctly)

My guess would be with joe blow behind the wheel the car would be slower, someone experienced who can steer well would be faster, harder to drive 100% but faster.

Edited by Risking

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...