Jump to content
SAU Community

Recommended Posts

Hey all,

I was just out giving my car a bit of stick, and on my way home it made a strange sort of sound on high boost. To me it sounded a bit like I had blown a hose clamp, it was that sort of hesitation gurgling noise from the engine but without the obvious cut in power. My mechanic mate in the car said it sounded like detonation to him, I've never personally heard detonation so I'm not sure.

Thing is, it is intermittent. I kept my eye on my AFR gauge and on full load it was at around 10.5-11, which is normal. So I gave it a few full load runs listening for the sound and watching all my gauges, but it seemed to have stopped, was all going fine. So I thought maybe it got hot and pinged a bit. But then on the last run it happened again. It was also backfiring a little more than normal and it is popping around on idle a fair bit (my car has quite a profound lean pop normally but it seems like more than normal to me).

Now I'm thinking maybe coilpacks or sparkplugs? The coilpacks are Splitfires though, and the plugs are NGK's gapped to 0.8. Any advice? I wouldn't have thought there could be any confusion between those sounds?

Link to comment
https://www.sau.com.au/forums/topic/385463-possible-knock/
Share on other sites

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Don't drive your car til you get your tuned fixed, you have been warned.......

Just joking. Just goes to show it happens to all the people who have got perfectly tuned cars too.

Edited by lilcrash
Link to comment
https://www.sau.com.au/forums/topic/385463-possible-knock/#findComment-6148568
Share on other sites

I really doubt you heard the knock. While flogging it, with windows down or up, turbo spooling, exhaust screaming and the road noise its f**king hard to hear knock. The only way I know I knock is with my power fc. If you can hear something happen out the exhaust, its probably not knock. I don't think detonation would cause any alteration to exhaust noise, because if it did then it would be listed as a known method for picking up knock.

Link to comment
https://www.sau.com.au/forums/topic/385463-possible-knock/#findComment-6148579
Share on other sites

Knock is actually pretty easy to hear, i wouldn't recommend this but if you want to see for your self, go fill your car with 91 octane fuel and go for a drive, you won't even need wot, it will just ping it's ass off under any load.

Link to comment
https://www.sau.com.au/forums/topic/385463-possible-knock/#findComment-6148611
Share on other sites

Detonation or Pinging sounds like a bunch of small coins rattling inside a metallic container.. if u did hear it it's not good.. Have u checked all hose clamps n hoses are secured where all the boost of air travels through??

Yeh it didn't sound metallic to me which is why I didn't think it was knock. But worst case scenario it is knock, so I'll treat it as such until I can resolve it.

I've checked all the hose clamps and vacuum hoses and everything is nice and tight. Thing is, it didn't cut power completely like a blown clamp or vacuum leak usually would. It felt like a little bit of a flat spot when the noise came on, but only just noticeable and only really to me because I know how my car feels. My mates didn't really feel it.

If you are driving a 34 [in your sig] then you should see your check engine light flashing when it knocks, sounds like a lazy plug to me.

Yeh well I was connected to NIStune when it occurred and it didn't trigger the knock maps. AFR's were good, timing looked fine, it was still in the primary maps, everything was normal. But then I don't want to put complete faith in the stock knock sensors.

I really doubt you heard the knock. While flogging it, with windows down or up, turbo spooling, exhaust screaming and the road noise its f**king hard to hear knock. The only way I know I knock is with my power fc. If you can hear something happen out the exhaust, its probably not knock. I don't think detonation would cause any alteration to exhaust noise, because if it did then it would be listed as a known method for picking up knock.

And my car is LOUD. External gate, screamer etc. This noise was when I was on full song and it was definitely audible. I just didn't want to take it lightly; an engine noise under full load that I haven't heard before on a hot day after the car had been given a fair hiding... If it's a lazy plug or something like that then I'm all good, but if it's knock...

Link to comment
https://www.sau.com.au/forums/topic/385463-possible-knock/#findComment-6148661
Share on other sites

I replace them every second oil change or when they die, which ever comes first. I get the odd miss with my car now, 1.1 on anything above standard turbo and boost just won't work.

Don't get iridium plugs, coppers are tried and tested to be better performers.

Edited by SargeRX8
Link to comment
https://www.sau.com.au/forums/topic/385463-possible-knock/#findComment-6148875
Share on other sites

Coppers don't perform better. they perform the same but are far cheaper, they just supposedly don't last anywhere near as long

You can't just say there better. if i could get iridiums for the same price id probably run them

Link to comment
https://www.sau.com.au/forums/topic/385463-possible-knock/#findComment-6148897
Share on other sites

Iridiums perform fine. The issue is, as 89CAL said, that Iridiums are much more expensive and on a modified engine they won't last that much longer than a copper one anyway. So there's no point getting Iridiums. Which, if my plugs are my problem here, is the case in point as mine are only about 10,000kms old.

Wish I'd known that before I bought mine :P

Link to comment
https://www.sau.com.au/forums/topic/385463-possible-knock/#findComment-6148955
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...