Jump to content
SAU Community

Recommended Posts

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

HE checked it all its pretty easy to check as he has the afm in the cooler piping

so he is checking it to make sure its all good

looks pretty perfect cant complain for the price as it didnt cost extra to bolt on and made the same power less 3-4kw of his gt3071

i ran a poorly built monsta t3 about 5 years ago lasted 3 and a half yeaers on 17psi before i sold the car and upgraded ive seen alot of people run turbos off ebay there seems to be more people having problems with cheap inlet manifold and highmounts over turbos

but this turbo doesnt look like many people on here have tried it YET :)

It sounds too good.

He bought an eBay turbo, with a tune for a completely different turbo, bolted up perfectly and ran it, WITHOUT TUNING IT, and made 260rwkw. That is more power than I am making at the moment with a bigger turbo, more boost and a full tune.

he has been giving it a really hard time and no signs of wear of shaft play YET but we will wait and see

lol @ checking for wear and shaft play after less than 24 hours of it being installed... :rofl2:

MOST AWESOME POST EVER ON SAU. Nearly pissed myself laughing

Yet he's considering spending what will likely end up being ~$700 on a temp turbo?

WTF?

jesus-facepalm-facepalm-jesus-epic-demotivational-poster-1218659828.jpg

double-facepalm.jpg

head-desk-facepalm-demotivational-poster-1274356860.jpg

facepalm-triple.jpg

4127992813_91c0640808.jpg

Cutting spending on education clearly isn't working. Then again, someone has to fit my tyres....

It sounds too good.

He bought an eBay turbo, with a tune for a completely different turbo, bolted up perfectly and ran it, WITHOUT TUNING IT, and made 260rwkw. That is more power than I am making at the moment with a bigger turbo, more boost and a full tune.

For the moment, have to call bulls***, as much as i'm for a good cheap deal, this one seems too cheap and too good, and the graph looks like it was done with excel....

If he's actually done it, f*** yeah and well done. full tune and more boost should make ~300rwkw? Good work.

hahaha excel i dont even know how to use word lol

its all legit nothing has been done to alter the reading its a real dyno read from his car with this $400 bolt on turbo

i guess everyone can say what they like at the end of the day its not my car

he wanted to test it and its proven to be really good

y dont others off here try the same if you doubt it

after all its only $400 and could always sell the turbo to the guys on calaisturbo or r31 club

i wonder who else s face palming them selves arfet a 400 turbo tuned for a different turbo makes decent power

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...