Jump to content
SAU Community

Recommended Posts

Looking to replace the original radiator on my r32 but i'm not sure if radiator thickness or number of cores/rows makes a difference? Been looking on ebay and other part's sites and i've seen all different kinds like 40mm 42mm 50mm 57mm, not sure which to go for as i just want to replace the old one without having to make any other mods etc. Any help is appreciated Cheers

Link to comment
https://www.sau.com.au/forums/topic/390276-does-radiator-thickness-matter/
Share on other sites

Thicker core == larger body of water + more surface area.

This pretty much just means that you can provide more cooling capabilities.

Unless you plan on pushing some serious horsies out from your engine you shouldn't need much more than stock core size (though with Aus weather, a little bit extra wouldn't hurt).

Be careful of the fit if you go non-standard size - you don't want the fan taking a bite out of the shroud... Some of the ebay ones dont fit at all.... You should be able to find an SAU trader with something to suit, and that would be a safer bet.

I run one of these Fenix 42mm radiators in my R33. Fits fine with factory fan shroud!

40 or 42 mm is the way to go as that will allow you to run the standard fan shroud and not have any clearance problems.

If you run any larger then you can have clearance problems and also your motor can run too cold if it is in close to stock condition. I run a 40 mm core with about 230kw and have difficulty getting the car up to normal operating temps even at track days and at Sydney Drags.

If you run any larger then you can have clearance problems and also your motor can run too cold if it is in close to stock condition. I run a 40 mm core with about 230kw and have difficulty getting the car up to normal operating temps even at track days and at Sydney Drags.

This is true!

Last time my car saw "normal" water temps was at Wakefield in December!

I have a brand new alloy radiator i think is for an r32 i have a 33 and only realised a year later when trying to fit. ill try find out. its about 40mm thick. pm me if your interested

Edited by abr33

But if u have a properly working thermosat it should self regulate the temps regardless of the radiator temps??

Brand new radiator, brand new thermostat. Factory temp sensor never goes over 70degC on the street

Is it worth it for a car pushing about 260rwkw? During the cooler days my average temps are 76 - 83C. On hot days I can see it rise up to about 88 - 89c on the power FC. I don't even need to be giving it a hard time. No idea if this is a concern or not...

Is it worth it for a car pushing about 260rwkw? During the cooler days my average temps are 76 - 83C. On hot days I can see it rise up to about 88 - 89c on the power FC. I don't even need to be giving it a hard time. No idea if this is a concern or not...

No concern. It's perfectly fine operating temperatures.

I have a 52mm radiator in my R33 and it fits with the factory shroud and clutch fan, so you can definitely get away with that size too. Been running it for a month or so now with no issues.

Agreed that Its perfectly normal to be into the 90's. Most modern cars run alot hotter than older ones anyway due to emissions so its not going to hurt. R34's run in the 90's stock. Thermostat starts opening at 84C i believe, fully open at 95. Whereas R33's open at 72C, fully open at 85C.

My OEM Nissan thermostat used to have the car sit at around 84-85C cruising the streets and highways. I replaced it with a higher flowing unit as i was getting a tad hot on the track. The aftermarked thermostat opens slightly hotter than OEM, be it 3C i believe. And now cruises at about 88C. It cools far better than the stock one though. I actually see a temperature drop when i give it a bootful lol. 300rwkw,

  • 1 month later...

Brand new radiator, brand new thermostat. Factory temp sensor never goes over 70degC on the street

I just thought some more about this- It aint right. Unless you are living in a very low temp area (snow areas) and have a low temp thermostat...

An OEM R33 thermostat doesnt start opening until the 70's so there is no way the water in the motor could stay that cold without flowing thru the radiator, and a very cold radiator at that...

I just thought some more about this- It aint right. Unless you are living in a very low temp area (snow areas) and have a low temp thermostat...

An OEM R33 thermostat doesnt start opening until the 70's so there is no way the water in the motor could stay that cold without flowing thru the radiator, and a very cold radiator at that...

Yep agree with that. Starts opening at 72/73C and fully open by 85.

And also, VCT doesnt even start working till ECT is above 75C.

I just thought some more about this- It aint right. Unless you are living in a very low temp area (snow areas) and have a low temp thermostat...

An OEM R33 thermostat doesnt start opening until the 70's so there is no way the water in the motor could stay that cold without flowing thru the radiator, and a very cold radiator at that...

Nismo low temp thermostat, live in Sydney

I'm not saying it's right, just what ECUtalk reports ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • New CAS just turned up from NZ Wiring. Looks like a nice bit of gear.  So, yeah. Triggered, bro. Realised I may as well do the cam belt while mucking about with it so will order one of them.
    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
×
×
  • Create New...