Jump to content
SAU Community

Recommended Posts

hey guys i have been away in thailand for the last 6-7 weeks and have not started my car since about 8 weeks (rb25det with microtech and stock turbo. the fuel has been in the car for about a month or 2 before i went away as car is unreg and i only just start her and let it idle for a while until i can get her all sorted for the road. it runs rich so it normaly has that strong fuel smell however today when i started it it didnt have that strong fuel smell instead it smelt a little sweeter if you know what i mean. it also seemed to warm up a hell of alot quicker than i can remember. i maybe just being paronoid but could this be stale fuel.

Link to comment
https://www.sau.com.au/forums/topic/391859-stale-fuel/
Share on other sites

my 86 skyline frequently sits around for months at a time without any fuel problems, knock never increases at all even after sitting for 3 months. but then again your tank was made by holden....:nyaanyaa:

haha exactly my point

Link to comment
https://www.sau.com.au/forums/topic/391859-stale-fuel/#findComment-6236825
Share on other sites

Same story here. Had a tankful of E10 100 in my S14 when I pulled it off the road 12+ months ago. Drained it all out to replace it with e85 and ran it in my daily with no trouble.

Link to comment
https://www.sau.com.au/forums/topic/391859-stale-fuel/#findComment-6236945
Share on other sites

Years ago I bought an early Mini, it had been sitting in a driveway for 16 years. We started it on the fuel in the tank to get it onto the trailer (after spraying WD40 down the plug holes).

Then again, My mate wrote off his R1 due to stale optimax. Three months off the road it bogged down as he took off out of the mechanics driveway. He gave it some more gas and the bike highsided him. He 100% blames the fuel.

Like has been said, if the fuel system is sealed there should be no issue, but how do you really know how sealed your tank is?

Link to comment
https://www.sau.com.au/forums/topic/391859-stale-fuel/#findComment-6237378
Share on other sites

Years ago I bought an early Mini, it had been sitting in a driveway for 16 years. We started it on the fuel in the tank to get it onto the trailer (after spraying WD40 down the plug holes).

Then again, My mate wrote off his R1 due to stale optimax. Three months off the road it bogged down as he took off out of the mechanics driveway. He gave it some more gas and the bike highsided him. He 100% blames the fuel.

Like has been said, if the fuel system is sealed there should be no issue, but how do you really know how sealed your tank is?

Take your fuel cap off, if it goes PSSSH it should be sealed. No psssh you've probably got an unsealed tank.

Link to comment
https://www.sau.com.au/forums/topic/391859-stale-fuel/#findComment-6237514
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...