Jump to content
SAU Community

Recommended Posts

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yeah Nik

2011 Rules (assuming 2012 is same)

ASSOCIATE CLASSES

For members with vehicles other than a Subaru. Any non-WRX cars (Motorbikes are not eligible to compete) with the exception of open wheeler race cars.

Cars will be grouped into one of the 4 categories depending on car type or a factored engine capacity. (See table)

AU3 - is for cars under 3 litre engine capacity

AO3 - is for cars equal to or over 3 litre engine capacity

Skylines - is for all types of Nissan Skyline

Evo – is for Mitsubishi Evo’s participating in the Evo Cup

CAPACITY MULTIPLICATION FACTORS FOR VEHICLES

For all Vehicle Types, capacity must be calculated on the following basis:

Rotary Engines multiply displacement by 1.5

Turbo Charged multiply displacement by 1.7

Supercharged multiply displacement by 1.7

Forced Induction Rotary multiply displacement by 1.5, then by 1.7

Important note: A minimum of a 4 point harness is highly recommended to all competitors but is compulsory for all modified Skylines.

Hmmm 34/90 entries.

I really should get off my arse and get the car serviced and pick up my new harness...

Oh and new fire extinguisher, need a new mount after scruits @ Forum Battle farked mine royally by losing the locking clips :rant:

Standard r32 points are fine. That's all I have. But you will need a blue battery triangle. Though that being said they keep changing the regs and I think if your battery is in the factory location you might get away without one. But I'd knock one up out of book contact or blue tape just to be safe!

Cheers

Quick question for you guys, I know Im prob going to get an obvious answer on this but anyways.

I have some KU36's which I bought for the track, they have been used 3 or so times for track use and 2 of them are just on the wear indicators (on an angle weirdly enough) but only in the centre of the tread, theres still heaps of meat left of the outside of the tyres, looks like they were over inflated or something and have worn down the centre more, so will these pass scrutineering? I know technically it has to be above the wear indicator but as I mentioned Its only on the very centre strip of the tread thats worn down on an angle and to the indicator, there far from bald.

Just dont wanna pay and rock up only to find out the tyres wont pass :whistling:

Weather front is coming in faster than originally forecast. And I'd expect that trend to continue. So think storm will pass on Friday and we should be pretty clear for Saturday.

Gonna be an awesome one with only a small group.

Nup... No last min entry for me.

Need to get the diff sorted and the car serviced, don't have the cashola for 2 weeks as kents owe me money, but wont pay up :rant:

simple fix for that... don't lend kents money in the first place ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...