Jump to content
SAU Community

Fined For Not Displaying Number Plate

r33gtrv-spec
 Share

Recommended Posts

r33gtrv-spec Enthusiast

r33gtrv-spec

Posted
Posted

Hey I was wondering if there was anyone here who has fought this charge in court, either successfully or unsuccessfully.

I was driving up to Sydney Saturday afternoon and was caught in a blitz at the marulan weigh-in station. As usual, my car was one of many suspicious and/or performance vehicles singled out by police.

The cop was a complete ass in the way he treated me and the whole situation and after being harassed and treated like a criminal who just murdered his mother, i was left holding a $375 fine for not correctly displaying my number plate.

My original r33 GTR front bar does not have any mounting holes for a front plate and I thought that would be enough to exclude me from having to permanently affix the number plate according to sub clause 2(a) of regulation 24 :-

(2) Subclause (1) (a), (b), (d) and (e) do not apply to a vehicle number-plate of a registrable vehicle if:

(a) due to the construction of the vehicle it is not practicable to comply with those paragraphs, and

(b) the number-plate is affixed in a manner that complies so far as practicable with those paragraphs.

I had my number plate affixed inside my front window on the dash, which I know isn't ideal, but is the only option I have without having to alter the original construction of my vehicle by drilling mounting holes in my front bar.

Any help would be much appreciated as I am intending to follow this through to court out of principal.

Sinista32 Grand Master

Sinista32

Posted
Posted

My opinion only. You will not have legal grounds to fight this in court.

Reason being (b)

- everyone has to drill holes. They sell aftermarket number plate holders to affix to the front of the vehicle.

To the law it will be as if your avoiding correct placement.

The relevant paragraph states A and B

Thats just me and I'm not a lawyer...

I have an aftermarket front bar too. My placement is on the left of the vehicle facing forward.

I can not place it in the centre/front as there is nothing to attach to.

Yld-180Act Community Regular

Yld-180Act

Posted
Posted

As long as the front and rear number plates are displayed and visible on the front and rear of the car you are fine, they don't have to be in any particular spot on the frot bumper, hence why when ppl have bike racks on the back that cover the number plate they just put a bit of paper with it written on it somewhere visible and don't get pulled up for not displaying their actual number plate. So if you took it to court I imagine you would be able to get rid of the fine

Don't swear by this it's just my impression as I got pulled up for the same thing while getting defected in my old 180 and the cop said it at least needed to be some where visible rather than just not there at all, having said all of this I didn't go to court with it because I had a number of other fines that went along with it that I couldn't fight so all in all this could just be the opinion of someone who has never had a good expirence with cops and not actually be correct

Trozzle Grand Master

Trozzle

Posted
Posted

Just with regards to what Jazz said above - I don't believe it's actually legal to make your own number plate in the case of having a bike rack that covers it...It must be an ACT government issued plate (they make them for bike racks too)

However, good luck. I'd say you're likely buggered. As Sin said, it needs to comply with both A and B.

If I were you, I'd be happy with the $375 fine. I recently got done for no front number plate, however instead of a fine I received a defect advising I needed to take it to Dickson. I reported my front number plate stolen and surrendered my remaining plate; RTA didn't give a fark.

So far mine has/will cost me:

Initial inspection at Dickson ($55)

Braided brake lines ($160+fitting)

Borrow legal exhaust ($25+ depending on how long I need it)

ENGINEER'S CERTIFICATE ($1046)

Since it's been more than 1 calendar month from initial inspection, I need to pay full $55 for the next one....which the dream boats will undoubtedly fail me on.

Wanna swap your fine for a defect? lol

r33gtrv-spec Enthusiast

r33gtrv-spec

Posted
  • Author
Posted

Whos full of shit? ..It's an original r33 GTR series 1, not 3, which is pictured above douche.

Anyways as i was saying its all factory. Front bar has an insert for a plate, which is also too small for the standard issued plate, which i could also argue, but like i said, no mounting holes. I have driven my GTR for 4yrs with no hassles regarding my front plate until now.

No thanks Trozz, been defected a few yrs ago, massive hassles. That was the main reason I stayed calm and collected in front of the cop. Stood my ground before, been defected, pepper sprayed, locked up etc..

Expensive, sore and not fun.

Oh i know how to appease the cops who seem to have control issues.

r33gtrv-spec Enthusiast

r33gtrv-spec

Posted
  • Author
Posted

Just looking for some advice on how to approach this.

I know I can drill holes in the bar and make a steel template to fit under the plate so it sits above the insert,

But my query was, if I have to alter the original construction, shouldn't my car be exempt under Subclause 2(a)?

Mitcho_7 Mentor

Mitcho_7

Posted
Posted

Completely unrelated, but myself and a carload of guys got pulled up at this same blitz on saturday morning on our way to future music festival. I was driving and passed the RBT, but thank god they didnt decide to let that little beagle sniffer dog come near the car...

Melly Grand Master

Melly

Posted
Posted

I got pulled into it, passed rbt, passed sniffer dog and passed defect check. One of the guys from here got a fine for a bald tyre (don't know how bald).

I don't think you have much of a chance as they will say everyone else manages to get their number plate on... Good luck tho... I drilled holes to get mine on, bent the edges of the plate a little so it fits and nobody has had any issues, same with my rear plate.

Amaru Veteran

Amaru

Posted
Posted

(a) due to the construction of the vehicle it is not practicable to comply with those paragraphs, and

(b) the number-plate is affixed in a manner that complies so far as practicable with those paragraphs.

Read the rules in their entirety mate, you won't be exempted because it only applies to vehicles where it is not practicable to comply with the rules. Considering 99.9% of R33 GTR owners have successfully mounted a front number plate by drilling holes/using some other sort of mount, what makes your R33 GTR individually unique that you cannot do the same?

Suck it up, pay the fine and follow the rules like everyone else has to.

045HOW Mentor

045HOW

Posted
Posted

Read the rules in their entirety mate, you won't be exempted because it only applies to vehicles where it is not practicable to comply with the rules. Considering 99.9% of R33 GTR owners have successfully mounted a front number plate by drilling holes/using some other sort of mount, what makes your R33 GTR individually unique that you cannot do the same?

Suck it up, pay the fine and follow the rules like everyone else has to.

Shock-Horror :O

S T A R 3 3 Veteran

S T A R 3 3

Posted
Posted

I'd play dumb and claim that I wasn't confident to drill it myself because I didn't know if there were anything behind the bumper that I could drill into and damage.

THAT and the damage that it may cause the paint would may not be covered under warranty of tje new paint job.

Worked for the missus - but it was the truth.

Hadouken Grand Master

Hadouken

Posted
Posted

How about you get a Cusco relocation bracket. And the series 1, as mine, does have a special bracket to mount the license plate on the front centre of the car.

Or as I said invest in a relocation bracket which puts it just to the left of the mouth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...