Jump to content
SAU Community

Recommended Posts

Hello

I have a R32 GTS-T with these mods; twin front pipe, catback exhaust, fmic, pod and soon will put on a RB25 turbo. Looking at computers now. But until I buy a ecu and tune the car, with these mods when is the time to upgrade to a bigger fuel pump and injectors?

My guess is the second hand pump is exactly that 2nd hand.

For the price of a new pump these days $160-$200 direct replacement why going 2nd hand?

Also its the life source of the car without fuel you will lean out and do more damage then $200 for a pump

Why not, I got a s/h tomei and its brilliant

Thats different in a way. Its more than likely not that old.

But still i would definately prefer not to use 2nd hand fuel pumps.

I knew op was going to say a 2nd hand GTR pump.

With most things that run in fuel, once they are removed they dry up, seals swell etc etc.

since you guys are talking fuel pumps, whats the limit of power for walbro 255L/h and 555nismo's on pump98?:whistling:

Pretty sure thay nicked named them Walbro 500, as in 500HP.

Basically they are generally good to 300+ wkw in most applications. Ive seen so many cars putting that power figure out, and more with only a single in tank pump.

Cant comment on Nismos one.

I brought a genuine walbro for 130 they come around cheap sometimes keep an eye out. Dont buy second hand, its not worth it when your chasing power increases.

Heres a mean set-up my mates put in is R32.4, 1200HP SX pump to keep his 420wkw gtr fed :D

post-89260-0-00153000-1332153107_thumb.jpg

Edited by HYBR3D

Nismo will do 400rwkw

Walbro - anyone's guess. They are very hit and miss. Mine nosed over @ 270rwkw, others have run into issues at less, some have made more. Gamble you take really. Walbro's from their own information - don't like higher pressures like a Bosch/Nismo etc perform ok.

In engineering is a term called B.S.F.C

(Brake Specific Fuel Consumption)

You could use this caculator to give you an idea about fuel requirements for injectors and pump.

http://www.rceng.com/technical.aspx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...