Jump to content
SAU Community

Recommended Posts

hi all, recently in all this rain we have had i stupidly ended up sinking my r33 resulting in the engine sucking water and stalling. Insurance decided not to rebuild the engine just to repair. Since picking up the car its been blowing oil out the exhaust, getting heaps of oil out of the breather (never happened before), dropping oil pressure randomly, and there is a massive tick on acceleration (sounds like a vw bug). i sent it back to get repaired again but i think they are just going to dodgey it up again.

what im after is some advice on the bare minium things everyone thinks should be changed since every mechanic ive spoke to says it shouldv'e been a full rebuild in the first place, so i can't understand why it only had an oil change and flush and the a/c pump replaced.

thanks

Link to comment
https://www.sau.com.au/forums/topic/397240-water-damaged-rb25/
Share on other sites

Did the engine definately suck water?

Probably busted rings or bent rods possibly blown head gasket.. get a leakdown and compression test done. Its possible to have twisted your crank too if its hydraulic locked with water. unfortunately the shit doesnt compress. the oil sounds a bit odd. Blowing smoke?

One of those insurance companier with lifetime warrenty on repairs? Sounds like you should read the PDS, phone em up to see if they'll cover your repaired motor, and then once satisfied they'll cover it, blow that shit up and get a new motor from them.

Should never have been flushed and put back on the road with a knock coming from it. Thats just unprofessional work as an assessor IMO.

Well I'm guessing since they touched the engine at all it must have been covered, if the engine is not performing as it should give your insurance company a call and explain it, also have a look at your policy and see exactly whats covered and how. In the meantime call ACCC and explain what is going on, they will let you know what your rights are based on your policy. Surprised it is running at all, like trying to compress concrete.

engine defintly sucked water pulled the intake off and was full of water and went back and checked it the next day and there was heaps of water in the oil. Didn't hydro lock car coughed and splutted and died then i had to start it again as it all happened on a corner down a hill so had to start it and drive up the street after nearly getting cleaned up by a truck (just cars don't do tows of a night). yer it blows smoke not much at idle but heaps when driving.

The car is insured with just cars i've spoke to them and they have said theres a life time warrenty on repairs so it should get fixed i just want a ruff idea of what should be done because im not picking it up this time until everything is done (they didnt even replace the airfilter the first time). I don't want to try and screw them for a new engine ill just be happy with the car in the same condition as before the water.

Well I'm guessing since they touched the engine at all it must have been covered, if the engine is not performing as it should give your insurance company a call and explain it, also have a look at your policy and see exactly whats covered and how. In the meantime call ACCC and explain what is going on, they will let you know what your rights are based on your policy. Surprised it is running at all, like trying to compress concrete.

yer i think ill have to give the accc a call just incase. The misses dad owns a panel shop and he can't belive the condition the car is in and how unproffesional they have been.

Its the last time i pick up a car in a rush without leaving enough time to check it out

engine defintly sucked water pulled the intake off and was full of water and went back and checked it the next day and there was heaps of water in the oil. Didn't hydro lock car coughed and splutted and died then i had to start it again as it all happened on a corner down a hill so had to start it and drive up the street after nearly getting cleaned up by a truck (just cars don't do tows of a night). yer it blows smoke not much at idle but heaps when driving.

The car is insured with just cars i've spoke to them and they have said theres a life time warrenty on repairs so it should get fixed i just want a ruff idea of what should be done because im not picking it up this time until everything is done (they didnt even replace the airfilter the first time). I don't want to try and screw them for a new engine ill just be happy with the car in the same condition as before the water.

No mate, you pay your premiums, they OWE you a complete and proper service.

You don't "want" to get a new engine out of them, you NEED to.

I would not be happy with anything less.

Your not entitled to a new engine.

You entitled to an engine of the same condition as the one which was damaged.

You'd also find it's probably not the insurance companies fault it wasn't repaired Properly to begin with.

The repairer usually submits a quote to properly repair the vehicle. The assesor clarifies the repairers quote and decideds how the repairs procede (you paid out or the vehicle repaired etc)

Authority is given to the repairer then it's repaired and just cars are invoiced.

Sounds as though the repairer has had a lend of the insurance company at your expense.....

hopefully all sorted i was contacted by the workshop today and they have offered to buy the car off me for more or less my insurance write off price so they dont have to warrent any more repairs. thanks guys for all the info.

p.s if anyone knows of a 32 33 for around 10k thats not on the for sale thread let me know

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...