Jump to content
SAU Community

Recommended Posts

Well its a carbon copy of Elrodeo666's head which was good enough for 445 kw at 1.4 bar on -5's.

Have a look at the inlet ports on Brad's engine (SHOWOFFR32)... that is what they should look like.

Have a look at the inlet ports on Brad's engine (SHOWOFFR32)... that is what they should look like.

BRB. I'll go tell the bloke that ported the HKS drag car that he did it wrong.

BRB. I'll go tell the bloke that ported the HKS drag car that he did it wrong.

Go ahead... All I am suggesting is that the port looks polished from the photo.

To enhance mixture quality it is better to have a textured inlet port surface, especially considering you have massive injectors that wont atomise very well.

Well they proberbly are. But considering the guy has built mild to wild RB's day in and day out for the last 20 years, there must be a reason why he has done what he has done. Who know's what that reason is. I'll ask him in two weeks time when Marcus will sit him down and call me from Japan.

Have a look at the inlet ports on Brad's engine (SHOWOFFR32)... that is what they should look like.

The guy in Japan who has done all the port/polish and r&d on the head has built more high powered full race engines, 9 sec drag engines and drift spec engines then most porn stars have ever had roots.

And yes its polished as well. Why..you'll need to ask him about it but as one of Japans top engine builders who has built 100's of high spec engines, I think he has a resonable idea of what he's doing.

But hey everyone has their opinions.

And Paul its 445kw @ 1.3bar

The guy in Japan who has done all the port/polish and r&d on the head has built more high powered full race engines, 9 sec drag engines and drift spec engines then most porn stars have ever had roots.

And yes its polished as well. Why..you'll need to ask him about it but as one of Japans top engine builders who has built 100's of high spec engines, I think he has a resonable idea of what he's doing.

But hey everyone has their opinions.

And Paul its 445kw @ 1.3bar

Just to be clear, your talking flow from a polished port vs fuel atomisation from a rough cut port right?

I figure the rate that Paul's car drinks E85 it probably won't make a lot of difference when its on song. Its not as though there are a lot of injector options to provide a streetable 2lt/min injector flow. The value of optimising fuel atomisation from porting/polishing methods could probably be weighed against the options available for injector spray patterns for similar effect.

Just to be clear, your talking flow from a polished port vs fuel atomisation from a rough cut port right?

I figure the rate that Paul's car drinks E85 it probably won't make a lot of difference when its on song. Its not as though there are a lot of injector options to provide a streetable 2lt/min injector flow. The value of optimising fuel atomisation from porting/polishing methods could probably be weighed against the options available for injector spray patterns for similar effect.

Theres more going on with this head than just a port /polish job.

Been all machined up at Naprec to HKS race specs and then some custom work by HKS.

It has been designed purely for response and slamming his arse hard back in the seat and fro getting around a track nice and quick.

Pauls head has a bit more done to it than mine and has been built to handle 600~650kw if he ever chooses to go down that path.

Anyway this is Pauls build so wait a few weeks and he'll let you see whats what and at the end of the day it all comes down to what it does when it's all bolted together and tuned properly.

It will be interesting to see how it all ends up..

Hopefully one day maybe a V-cam and those new turb's that Gav has, it would be quite an animal.

Unfortunate about the old engine!

But it will certainly be interesting to see how this new setup performs in relation to the old setup. Especially with the addition of the new head. What sort of port job was done to the old head?

My mates car runs low 9's with a near std head, ports are just cleaned up. Makes about 880rwhp. What bigmikespec has said holds true, port finish 101 regardless of head type or setup usually doesn't go any finer finish then 80grit. Polishing the surface slows air speed and ruins mixture motion through the port. But maybe this particular guy has a formula that works for him and it goes against the theory that everybody else in the world works around. It will be interesting to see if it makes a difference or not.

Gotta keep an open mind about everything!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...