Jump to content
SAU Community

Recommended Posts

Your engine sounds very similar to what mine is ( capacity & your intended power level ).

I wasn't entertaining the use of 280's or 290's...but was thinking something along the lines of a 10.5 & 268 , since one of my old JUN's is now damaged.

You have now chucked a curve ball at me in regards to the cams I will go with ..so I eagerly await a proper figure once sorted from your test mule . :D

And I will be keeping the factory air box , but using a large carbon duct to the bottom of it that came off Geoff fear's gtr .

Keen to see photo's of that duct. Thats interesting!

I had a set of JUN 264's at 10.5 but we ran them up and wanted something that more more aggresive on the ramp rates.

Very strong paul, congrats thus far...once sorted, its time to enjoy that car and get it out of the workshop :) rowing gears looool

So this setup will be dedicated for e85 only?

Rowing gears.... w0000!

Nah man. Ethanol Content Sensor. Put whatever the hell I want in and the ECU will adjust it to suit! Vipec can do this too ;)

That duct is a 32 thing, I have one on mine, it cups the hole in the front bar and turns up under the air box, haven't seen one for the 33 or 34 yet

All that power and through a paper filter, freakin awesome, got a graph

Ahh, take a pic and MMS it to me tomorrow?

Yep. $10 paper filter. Pods and exxy jap filters can suck a big one! no graph yet. My phone ran out of charge while I was there. Looks pretty fat!

Mad stuff. That black box is freaky!!

Guy plugged it into my 34 along with MAP hose to ECU and started and run after a minute configuring inputs etc on his laptop.

Then Paul made my engine suck a rag.......eh Paul :no:

Bahaha then he stands there while Sean pulls off the defused and cooler piping...

The old rag eater ;)

Also, you need clear indicators ;)

Im undecided on them. Definately need the S3 Lower lip though. S1 looks homo!!!

and shut your bonnet and take a photo on a sunny day :O

she looks nice mate. But black TE37's wheels look nicer IMO.

Haha. "storm trooper" look? I agree. Black on white looks mad!

Once I get it back i'll spend a few days polishing it and take some half decent photo's. Errr, what a shit job that is!

well, paul is quiet the phag, and he was discussing with his tuner on colour coding his aqua full motec header and exhaust and accesorising with hot pink rins and green wheel nuts. He seems to think it will bring all the boys to the yard, for what purpose i do not wish to know...

well, paul is quiet the phag, and he was discussing with his tuner on colour coding his aqua full motec header and exhaust and accesorising with hot pink rins and green wheel nuts. He seems to think it will bring all the boys to the yard, for what purpose i do not wish to know...

Well I'm sure he could teach you but he'd have to charge lol

well, paul is quiet the phag, and he was discussing with his tuner on colour coding his aqua full motec header and exhaust and accesorising with hot pink rins and green wheel nuts. He seems to think it will bring all the boys to the yard, for what purpose i do not wish to know...

pink_bear0.jpg

I was thinking these! Thoughts?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...