Jump to content
SAU Community

Recommended Posts

I had the exact same problem. Under load above 4000rpm (dependant on load situation) both on road and on dyno (ramped, etc) when accelerated hard my car would have a miss and sort of hesitation. If i eased on the accelerator, the problem did not occur. We changed fuel pump, had all injectors flow tested, etc, as they are brand new, and car still hesitated (missed). I WAS running NGK platinum plugs (gapped to 0.8mm) and the car still had same symptoms (exactly like you are saying). I have super tech valves with titanium retainers, etc, 1.5mm overized valves stainless on intake and nitrite coated on exhaust. My springs are 95pounds at the seat and still car hesitating under load. Problem was found that my spark plugs were arching out under load. (Simple rule of thumb for old school mechanics - plugs up top, points down low) checked my coil packs, they were fine. Changed the plugs to v-grove and solved my issues instantly. Have also since put SplitFire coil packs and HKS plugs. I was running 12psi when this was occurring so had nothing to do with coil binding or a dud valve spring.

That's just my two cents. Hope this info helps.

I'll mention this when I speak to them today. Cheers for the input ;).

Paul I know you mentioned the timing looked good but might pay to call ross about the trigger kit a local company here in bris was having miss fire issues on there car and they traced it back to something in the trigger kit arrangement. Sorry this is second hand information so i dont all the details but thought was worth a mention..

Paul I know you mentioned the timing looked good but might pay to call ross about the trigger kit a local company here in bris was having miss fire issues on there car and they traced it back to something in the trigger kit arrangement. Sorry this is second hand information so i dont all the details but thought was worth a mention..

We had what seems to be that issue you're talking about in 2011 when I put this kit on. The issue for us was the GT101 sensor was not PERFECTLY in line with the trigger wheel. New bracket has since been made. There's no logs of issues with timing or anything. When we had that issue we were seeing RPM logs of 86,000 RPM, 44,000RPM and would be hitting the RPM cut. Sound similar?

We had what seems to be that issue you're talking about in 2011 when I put this kit on. The issue for us was the GT101 sensor was not PERFECTLY in line with the trigger wheel. New bracket has since been made. There's no logs of issues with timing or anything. When we had that issue we were seeing RPM logs of 86,000 RPM, 44,000RPM and would be hitting the RPM cut. Sound similar?

Again this is second hand info but they were talking another revision something to do with the cam sensor though.

I heard pauls testicles had shrunk so much he has started investigating plastic surgery to have a vadge grafted onto himself? Who woulda thought an electrician would have small balls?

On a brighter note, hurry up and launch it brah

skidz for kidz, or fatz maybe

Any updates on the strange miss yet ?... Want to see the figures this will put down in anger .

Sitting here with Yavuz in a hotel right now. Nothing happened today. As soon as I know it'll be up here. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...