Jump to content
SAU Community

Recommended Posts

just putting these out there 7k delivered

older style so ( parts may be hard to come by)

http://page3.auctions.yahoo.co.jp/jp/auction/c435357961?u=%3btokusan707

is HKS manual transmission. There is no oil leakage and noise. Dirt.
It becomes the 6-speed MT. ATS carbon twin plate clutch will also be set.
Thickness of the disc of the ATS clutch is 3.7 mm ① 3.7 mm ②.
Gear ratio of HKS mission is the version Ⅱ of 2.701 ② 1.904 ③ 1.343 ④ 1.000 ⑤ 0.832 ⑥ 0.734 ①.

trust 6 speed 7 k delivered

http://page22.auctions.yahoo.co.jp/jp/auction/l213425216?u=%3btokusan707

trust made ​​dog clutch-type cross mission do. There is no oil leakage and noise.
There is dirt. ① speed 2.782, ② speed 1.938, ③ speed 1.506, ④ speed 1.178, ⑤ 0.920-speed, gear ratio is 0.777 ⑥ speed.

That's good to know, cheers! What does it drive like?

I'm really liking this getrag idea. Does anyone know what tail shaft to use with the Getrag in a 33? I know you use the R34 front shaft but not sure on the rear. I'm assuming the 34 unit also?

I had a Getrag with everything for the conversion and didn't do it... I don't think it was much of an upgrade in retrospect in terms of strength (besides the ratios) and it is generally accepted that they are not rebuildable (even though people do), and spare parts availability is an issue. So I got rid of it... I agree with the fat man.

I had a Getrag with everything for the conversion and didn't do it... I don't think it was much of an upgrade in retrospect in terms of strength (besides the ratios) and it is generally accepted that they are not rebuildable (even though people do), and spare parts availability is an issue. So I got rid of it... I agree with the fat man.

Everything is available either ex Nissan or ex Toyota, it's the exact same box as the Supra box apart from the rear end.

Always thought those Trust boxes were pretty interesting. 2 overdrives and no 1:1 gear.

Everything is available either ex Nissan or ex Toyota, it's the exact same box as the Supra box apart from the rear end.

Always thought those Trust boxes were pretty interesting. 2 overdrives and no 1:1 gear.

They're not the same box. The gtr version, the gears are not as wide.

The getrag with 4.11's will be silly short, but I have a source for 3.545 diff gears. Talking to the guys that have the same grunt, give or take, they have said the boxes hold up. IF it does pop, the PPG dog set will go in. Ratios to die for.

I'm surprised to hear that the getrag is up for the task

MAY not be, but if I be nice to it, it may last a few years, I which time I can save for what will eventually go into it.

Car has only done 3 kms this year. Need to get back to driving it :(.

Just saying, go sequential, you won't look back :)

PPGs are strong, how strong is a different matter, the BSM car went through a few of em to while they still had restrictors in limiting power to about 300rwkw, very torquey motor though

And for what it is going to cost to set up the Getrag your not far off the OS88

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...