Jump to content
SAU Community

Recommended Posts

7 minutes ago, ActionDan said:

But.. how can we agree on something? I run a Haltech that fits into my kick panel. 

#theshame

No Peter loves living dangerously like you and runs a haltech without a crank trigger.

2 minutes ago, ActionDan said:

You should get Emtron, it will double your power instantly.

Don't be silly, you know that any ECU can make power, its how it behaves everyday and weather it delivers on the features it's marketed with.

 

Anyway looks like Piggaz cheaped out and bought a knock off Motec m150.... 

 

M150.thumb.jpg.db4a8e5d001f3ce14e0d0c42aad2d99a.jpg

So somehow the ECU is the issue, not the old CAS, and moving to a superior crank trigger setup is the fix, but we blame the ECU?

Sounds backwards?

Wait? I've got it! Its because the signal has to travel through so many boxes and so many wires!

Just now, ActionDan said:

So somehow the ECU is the issue, not the old CAS, and moving to a superior crank trigger setup is the fix, but we blame the ECU?

Sounds backwards?

Wait? I've got it! Its because the signal has to travel through so many boxes and so many wires!

See now you are starting to get it...

 

The old powerFC, Nistune and adaptronic don't suffer from issues... unless of course the loom is cooked or the CAS is actually faulty..

See now you are starting to get it...
 
The old powerFC, Nistune and adaptronic don't suffer from issues... unless of course the loom is cooked or the CAS is actually faulty..

I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?
1 minute ago, ActionDan said:


I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?

They are actually, but let's not get the facts in the way of things. As long as you are happy with your car that's all that matters!

4 minutes ago, ActionDan said:


I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?

Lol if your in vic go for a drive in Andrews car

next day you will rip out haltech and put a power fc in and have a retune with the bloke who sorts his car

100% garentee that

 

2 hours ago, ActionDan said:

How much better is your car to drive now you've switched from Haltech to Emtron anyway, must have been a massive improvement? 

Bit weird Mick, you thought the Haltech was decent a few months ago? What happened? 

"Hey guys up for grabs is a Haltech elite 2500 with a patch loom by haltech to suit an R34 GTR. ECU has only been in the car for around 10000km max im sure anybody shopping around knows the capabilities of this top of the line ECU. $2800ono"

I guess top of line doesn't actually mean it's any good I suppose. Soi I reckon the improvement must be massive and dyno proven with no other changes to skew results... 

 

Lol i sold that POS on behalf of a friend. I never thought it was good as it never remembered the tune properly mate.

Sadly that wasn't a bad thing because the tune was as bad as the ECU ?

I wasn't going to offer my ACTUAL opinion on that when i was trying to sell it haha ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...