Jump to content
SAU Community

Recommended Posts

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

Rwkw pffft lol

yeah i know!

But it is my power goal!

A couple of years ago i chased the magic 500hp and got there in my old v8 lexus i built with my paps!

Now im going the 500awkw

obviously power is not all! A well balanced chassis n highly tuned suspension will all come into play as the car progresses!

I basically wanna do a 9 have full street trim n a/c and a h pattern box! But still try to make the engine bay not look like theres 30+ grand spent on it!

Oh and you should really be asking your engine builder what head work, as they will be creating and designing the setup.

What have they said thus far?

i have asked n we have been through it!

But im a pain in the ass n wanna know what the sau community would do!

Isnt that half the reason the forums here!

Without a fkn paragrapgh of parts

cams, valves, springs, machining etc!

Its listed a few posts back

he told me 2871s are lag monsters but they would do the job but i wont like em lol

I live in NZ where anything goes so long as it is done properly and certed but if you are so constricted by your local laws have you considered making your car a track only so you can do what is best rather than what is legal? Sounds like you have another daily driver so get a trailer and go to town on your Skyline!

Get a single Borg Warner S400SX with 67mm compressor wheel. Get the head ported by someone who knows what they're doing then give all the information to Kelford for them to make you a custom grind.

Well the OP wanted 500kw, you going to say the -5s will get 500kw? Are you saying with a pair of HKS GT-RS combined with a RB30, the OP won't have useable power? It all depends on his build and supporting modifications. You're providing misleading information. Read his first post.

Back to back comparisons, what? from GT-RS > 2530s? Running a bigger turbo which their engine was not built for? Piggaz was running a head which wasn't even ported, slapped on with 270 10.25mm. The only experience they have had is downsizing their turbo to make the full efficiency of their engine/turbo combination.

Whereas someone who has had experience with 2530s and has built their motor to suit the HKS GT-RS? Who has no surge at all? Whereas those guys complaining about their surge and how it is a shit turbo etc are making less power than someone in a 2.6? What no explaination for this? You obviously don't know what you're talking about with your 365kw. :whistling:

As i said earlier, Piggaz motor can't handle the GT-RS even if it was stroked because his cylinder head was not made to suit the application. If done right, it would've blew his mind away. Yet he made under 450rwkw? So he might as well go back and use -5s and achieve the same power because his car wasnt made for 450+ otherwise he would have got it.

I like how you seem to know more about my cylinder head than myself seeing that its now a "standard head".

Ring up Yavuz now and he said himself the night we were tuning "450 is just a intake cam twist away" and that was with baby 5's. We were going to go for a 'hero run' but for what? Satisfy some bloke on SAU?

Look at Racepace and their king dick engine that is 1.5 seconds slower around Winton than a V8 supercar. Makes more power than your's on 20 psi on 98 with a curve to die for with 449 kw. But I spose that setup is crap too because it didn't crack 450?

Gav made 462 rwkw.

Ryan 1200 is at 440 with 2530's.

But hang on.......

As i said, the car was laggy if i am driving through the streets around on 2nd gear but if you drove from 1st and kept in on power. Was a monster! :P

What sort of "GUN" setup needs to be driven in 1st to make the car move :whistling:

To the OP. After seeing the results on N1GTR's car with a DIRECT COMPARISON (ONLY thing changed was the turbo's) between the high and almighty RS's and 5's there is no comparison. It's comical and just downright rude! I will not be posting the graph as it is not mine to post.

This discussion and argument has been had many times. It just goes round and round in circles. There is a reason why the 'circuit' guys got rid of the RS's... that thing called area under the curve.

med_gallery_705_63_26377.jpg

Which curve would you rather? Since went onto make 620 HP at the treads.

"Oh but 5's have no top end". Yep :thumbsup:

The ONLY result that I have seen over the years that has been awsome with the RS's was Diemar's. He said himself that you need a huge dollar head to get them to work properly and that's something that most guys wont do.

That above graph sums up perfectly why -5 cars will still be quicker at the strip than the RS'

All the antilag/launch control in the world wont keep the tyres or clutch slipping to keep the engine at 8000rpm unless you have 1000+hp, the revs will drop back and it will fall off boost

The other thing the graphs wont show is how long the RS's will take to come back on between gearshifts, Piggaz's car is near on instant, infact it was better than my old car, which I felt was about as instant as a turbo could possibly be.

Ive been in a RS powered GTR once, and I was counting the seconds for boost to come between gearshifts, it reminded my of a mates GTR that had a T88-38gk on it, but without the 1000hp hit up top

another mate had a 300zx with 2540's (near enough the same as RS') it was also laggy, and it had mega $$$ heads and manifolds on it, it was slower round QR than 300zx's with standard turbos and more weight

.

OS RB32/26

OS Rods

CP Custom pistons

Modified Pins

Nisspeed Sleeves

Nisspeed Spec Head

Nisspeed Spec Cams

Garrett -10's

Dry Sump

Motec M800

MSD coils

832hp @ 8290rpm and 22psi (maybe a little more in her)

Also 649ftlb torque at 5000rpm and 300ftlb @ 2900 and 400+ @ 4000

This is actually John Munro's new engine for his track GTR...don't even think he knows the results yet

just throwing it out there

HAHAHAHAHAHAHAHAHA

i havnt gotten to the end yet of this thread yet but couldnt wait..

you wouldnt know response if it f**ked you in the face

I didn't say it was responsive, hence the change to RB30 to improve response :)

What the whole point of this thread is that those who are saying the HKS GT-RS are shit compared to the -5s are misleading those whom are asking.

For those whois motor, such as Piggaz wasn't built for it are saying that the turbo is shit. Is incorrect. It is his motor which is shit and can't handle the GT-RS.

Pointless argument going back and fourths, in the end, just trying to give others insight in to what is being said is not necessarily right.

If you want to run -5s, -10s if you're happy with your car then so be it. If it works then leave it if not change it, simple :)

just throwing it out there

That was the engine dyno results, no airbox/intake piping, drivetrain etc.

Would be back under 500rwkw you'd think once in the car. Hard to say as no results got posted after that far as i know (be awesome if they were handy to see once incar).

I didn't say it was responsive, hence the change to RB30 to improve response :)

What the whole point of this thread is that those who are saying the HKS GT-RS are shit compared to the -5s are misleading those whom are asking.

For those whois motor, such as Piggaz wasn't built for it are saying that the turbo is shit. Is incorrect. It is his motor which is shit and can't handle the GT-RS.

So tell me why im a measly15 kw behind you on smaller turbo's on less boost..?

2.0 bar trailing back to 24 psi

im at 24 trailing back to 22?

I didn't say it was responsive, hence the change to RB30 to improve response :)

What the whole point of this thread is that those who are saying the HKS GT-RS are shit compared to the -5s are misleading those whom are asking.

For those whois motor, such as Piggaz wasn't built for it are saying that the turbo is shit. Is incorrect. It is his motor which is shit and can't handle the GT-RS.

so ur saying GT-RS wont be shit yet you havn't even finished the motor yet to see, but ur happy to disregard anything from piggaz's car and the MANY MANY OTHERS who have said that they are outdated crap ranging from 2.6-3L.. Face it turbo technology has come forward alot and they are just outdated, Spending 15K on king dick headwork to match outdated turbos is like shaving your balls with a piece of bark and is not cost effective or smart.. You pick turbos to suit your motor not vice versa

Get off the forums and get out into one of these cars and see for yourself how much better they are.. I of course know you wont do this as its too much effort and would much rather munch ur gearbox throwing it back to 1st to get some boost.. Although it might just be your boost controller, I hear you have alot of trouble setting it up and need someone else to do it for you..

sorry buddy you lose this argument and will only make yourself horribly unpopular and disliked trying to argue your point.. I could write more but cbf arguing with narrow minded people

So tell me why im a measly15 kw behind you on smaller turbo's on less boost..?

2.0 bar trailing back to 24 psi

im at 24 trailing back to 22?

From my last run, i can tell you it wouldnt be only 15kw :)

so ur saying GT-RS wont be shit yet you havn't even finished the motor yet to see, but ur happy to disregard anything from piggaz's car and the MANY MANY OTHERS who have said that they are outdated crap ranging from 2.6-3L.. Face it turbo technology has come forward alot and they are just outdated, Spending 15K on king dick headwork to match outdated turbos is like shaving your balls with a piece of bark and is not cost effective or smart.. You pick turbos to suit your motor not vice versa

Get off the forums and get out into one of these cars and see for yourself how much better they are.. I of course know you wont do this as its too much effort and would much rather munch ur gearbox throwing it back to 1st to get some boost.. Although it might just be your boost controller, I hear you have alot of trouble setting it up and need someone else to do it for you..

sorry buddy you lose this argument and will only make yourself horribly unpopular and disliked trying to argue your point.. I could write more but cbf arguing with narrow minded people

Yeah i am tired of wasting my time arguing my point to those who are narrow minded only to the -5s as well. We'll just leave it there. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...