Jump to content
SAU Community

Recommended Posts

when im driving sometimes, no matter what gear im in, the turbo will spool but the engine wont go anywhere, then seconds later it will realise and continue like normal, i usually have to take my foot off the accelerator and put it back on for it to stop, so when im doing 50ks then go to 3rd, and acceletrate it wont go anywhere till i take my foot offf and put it back on.

any ideas?

Link to comment
https://www.sau.com.au/forums/topic/399470-a-flat-spot-in-r33-turbo/
Share on other sites

I was thinking it can't be that because it happens after I chuck it in gear and it happens if I just drive in the same gear and not change it...

These words still make it sound like its clutch slip. Where is the friction point on the clutch? High up the top?

ive since discovered, **sometimes** when i put my foot on the clutch as im coming to a stop the car will act like its conking out (engine light comes on, hicas comes on, revs go to 0) then when i take my foot off, the lights go away and the engine goes back to how it was? is that a transmission problem?

ive since discovered, **sometimes** when i put my foot on the clutch as im coming to a stop the car will act like its conking out (engine light comes on, hicas comes on, revs go to 0) then when i take my foot off, the lights go away and the engine goes back to how it was? is that a transmission problem?

Atmo BOV?

Does that happen in neutral or only when in gear?

If only in gear then the clutch is buggered and its not disengaging correctly

Need some more info. If u keep it in gear with the clutch in does it try and stall or only when u are slowing?

89cal may be right about the bov but need more info

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...