Jump to content
SAU Community

Recommended Posts

hi guys -

i have a R33 i am parting out with -

already missing is motor gear box tail shaft diff (diff might be for sale) calipers front and back and suspension and steering rack - aer gone - dash is bugged

good point body is straight - bonnet has some hail dints but good other then that (spray job wouldnt hurt) $200 ono

all seats front and back including rails are for sale - offers - all boot linings -

boot and rear wing standard R33 gtst - offers

fuse box in engin bay - no lid $20

has master cylinder and lines as well and handbrak just no calipers

good basic shell if anyone wants it $300

Edited by Reese69

hey guys ive still go a few things left over from when i stripped my 33.

hubs $250

intake manifold $150

control arms $50-70

passenger door missing window reg $100

clutch brake pedal plus master cylinders $200

cas $100

tail lights $130

most interior panels

jjr 3" stainless steel cat back exhaust $250

price up dates

plus some other stuff

intake manifold $50

both rear lower control arms $50

passenger door missing window reg $50

clutch brake pedal plus master cylinders $100

cas $50

tail lights $80

front and rear seats $180

jjr 3" stainless steel cat back exhaust $220

fuel pump $30

passenger side guard $50

stock cat back exhaust $150

stock shocks $150

turbo manifold $50

adjustable front tie rod ends $50

Edited by dd33

Just testing the waters locally for my 1989 R32 GTR

63k km on the dash (not sure if legit, but seemes clean enough)
Very Clean interior, stock GTR seats, dash perfect and uncracked (rare)
Drivers bride brix 1.5
New fully forged engine by chasers motorsports with receipts for most things from previous owner in ViC
<2000 km on the twin 2860-5 turbos
Haltech platnium pro ECU ~ safe tune
Apexi power intake pods
Gates timing belt
Adjustable cam gears
Freshly built head (you can see for yourself the fresh acid dip)
18x9.5 sparco racing wheels
Brand new excedy HDCB Clutch
Walbro 255lph fuel pump
Carbon fibre weathershields
+++ More but id have to go throgh my stacks of receipts!!

1 More month of ACT REGO!!

The setup will easily make well over 300kw with bigger injectors (I have ID1000 injectors ready to go in for extra)
looking for $14k ONO
or $12k ONO with stock ecu and different wheels

Or if you want everything done for the 100k km service it will be 13.5k + whatever your choice of mechanic charges

Why so cheap?
Because....

I beleive it needs a new tensioner pulley
the pulley was making a weird noise one morning and after further investigation the timing belt has a bit of slack.
Ever since discovering this i havent driven the car just to be sure!
i beleive the timing will need to be redone aswell because the CAS was removed to check the belt
Drove like a dream before; most probably will still drive like a dream now, however dont want to risk a possible catastrophe!

it would be safer to say it needs to have the 100,000 km service as a precaution while the whole front cover is off
to have the tensioner bearing (and everything associated) changed before driving anywhere

There is also a minor dent along the drivers side door and rear fender were the front wheel picked up something.

after spending all this money of the engine and personal issues that have come up i cant afford to spend any more on this beast!
i am way too busy atm to do organise a 100k km service. wont be free until february 2014, so the car is up for sale until then !

if you want to view the car give me a text on [removed]

 

post-87038-0-43386600-1382878068_thumb.jpg

post-87038-0-70764700-1382878070_thumb.jpg

**EOI for some stock 34 gtt parts:

Bonnet
Front Guards
Standard Rear Wing

All parts are factory black, fenders and bonnet in very good condition (will double check for light surface scratches), standard wing's paintwork has seen better days and is fairly faded on the top of the wing blade (will need a respray).

**The following are also up for grabs:

GENUINE Impul gtt front bar
Replica 34 gtr spoiler with carbon wing blade

Impul front bar is a little rough as it had a confrontation with a kangaroo, but won. The paint has cracked and there is very slight frays on the fibreglass around the grill, but otherwise structurally perfect.

Replica spoiler has never been fitted as I'm waiting on carbon wing stands from a group buy on here. The carbon blade is very good quality but the standard wing stands didn't align properly with my boot. It's a dead easy fix, but I haven't been bothered to address it.

If the carbon stands fit properly I may keep it (unless the right price is agreed upon)


I will work out pricing asap, just gauging interest for now.

PM for info and pics

Selling some R32 GTR (RB26DETT) gear off. and a couple of 34 bits as I need cash

New Harmonic Balancer - ATI (Super Damper), - 500HP - $400

  • Eliminates torsional crankshaft vibrations
  • Exceeds SFI 18.1 specs
  • Black zinc chromate finished
  • Tunable, rebuildable, and extremely efficient at ALL RPM
  • Laser engraved 360° timing marks

New OEM Injector Ballast Resistor - $100

New Dspeed smoked indicators - $300

Near New BM57 (ABS) - $300 (couple of hundred KM's)

New SRI Front Upper adjustable control arms - $175

New SRI Cold Air Box Kit for R34 GTT - $140

^good savings^

Used parts in good working order and condition

Denso 720 Injectors - $350

Nismo Oil cap in Packaging - $75 (Brass/Rose in colour)

Steering Rack - $100

Power Steering pump - $100

Starter motor - $100

Front Bar Mesh - $50

Front Seat belts vgc - $150

Cusco Strut Brace (round) - $50

5Zigen JASMA exhaust muffler - oval (axle back) $175. As new.

Professional Custom made Exhaust true 3" cat back with Mid muffler & Oval tail muffler (mandrel bends etc..) under 1000kms no damage - $450

HID's for N1 headlights with globes & ballasts - $100. Fitted and used for a few weeks.

Considering parting with:

- NISMO Blank Keys in packaging - 1 x 8 point, 1 x 10 point. Open to exceptional offers (via PM only).

- New Genuine N1 front bar with OEM Lip and N1 Vents in Original OEM Packaging - $900 (as a package only)

All + Postage.

PM me and I will get back to you.

(more parts may be added so check back)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...