Jump to content
SAU Community

Recommended Posts

Well, Ill just jump in and say this before some dickhead says it..

"Just do a line locker bro .. just do a burnout .. der"

I know this isnt the answer your looking for, so the only other way that i know of is..

Get your car up on a hoist, and then attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

if the other wheel spins and is kinda joly/grippy this means your LSD is on its way out .. proberly a busted side arm or teeth being chipped off

  mindflux said:
(Note: Exercise only practiced on race tracks)

Naturally.:rofl:

Yeah, the viscous LSD always seemed to have a mind of it's own as to how many wheels it would spin eh, but we shouldn't be using these fine Nissans just for smokeshows now, should we? :D

But you're right, the question was to check for an LSD, and jacking it up and spinning the wheels is the best way.

Perhaps there's a cue to the internals by looking at the back of the diff housing?

  Quote
But you're right, the question was to check for an LSD, and jacking it up and spinning the wheels is the best way.

yes that's the best way.

  Quote
attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

That doesnt make sense.

If you spin one wheel the other wheel will spin in the same direction if it's LSD.

If it wasnt originally lsd one wheel will spin in the opposite direction to the other.(single spinner)

However you'll find that most skylines come with lsd.

If your spinning one wheel and the other is spinning in the same direction but not at the same speed it might not be working properly.

if you wanna find out if your car has LSD then you could give your VIN to an authorise Nissan Japan service center (or any Nissan Dealer in australia) or infact anyone with the NSSAN Japan FAST system, they could plug it in and let you know if your car got one from the factory.

When I first got my car, I got it serviced and the dude goes "wow you have an LSD on yours". And I was like "huh? don't they all have em?" (coz I had a viscous LSD (2) on my ex-drift 180sx). He informed me that not all R32s came with an LSD, so I checked up on mine at my local nissan dealer n found out that mine had a factory LSD (dunno if its 1 or 1.5), and not only that it was a limited edition V Selection 2 which was given the trimmings of a GTR and LSD n HICAS n strutbars n all the goodies lol

Uhh.. i Thats exactly what i just said ... wasnt it?

Edit:..

  Quote
Quote:

attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..  

That doesnt make sense.

If you spin one wheel the other wheel will spin in the same direction if it's LSD.

If it wasnt originally lsd one wheel will spin in the opposite direction to the other.(single spinner)

However you'll find that most skylines come with lsd.

If your spinning one wheel and the other is spinning in the same direction but not at the same speed it might not be working properly.

Thats pretty much the exact same thing i just said .. how does it 'not make sense'

lol now youve got me confused :D

The ECR33 (R33 GTS25t) has a factory LSD (8/93 onward).

From I think 95 onwards there was a factory option for an Active LSD which is obviously better than the standard LSD in that there is some sensors and a computer to control the way the LSD works.

The easiest way to tell whether you have active LSD is to look on the dash and if there is a SLIP or A-LSD indicator in the middle you have A-LSD.

Very few cars have the Active LSD so don't get your hopes up.

  • 2 weeks later...

Ok then.....

  Quote
attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

like I said before an lsd has both wheels spinning in the same direction at the same rate.

Single spinners also spin at the same rate but in opposite directions.

Hope that clears things up. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...