Jump to content
SAU Community

Recommended Posts

Well, Ill just jump in and say this before some dickhead says it..

"Just do a line locker bro .. just do a burnout .. der"

I know this isnt the answer your looking for, so the only other way that i know of is..

Get your car up on a hoist, and then attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

if the other wheel spins and is kinda joly/grippy this means your LSD is on its way out .. proberly a busted side arm or teeth being chipped off

(Note: Exercise only practiced on race tracks)

Naturally.:rofl:

Yeah, the viscous LSD always seemed to have a mind of it's own as to how many wheels it would spin eh, but we shouldn't be using these fine Nissans just for smokeshows now, should we? :D

But you're right, the question was to check for an LSD, and jacking it up and spinning the wheels is the best way.

Perhaps there's a cue to the internals by looking at the back of the diff housing?

But you're right, the question was to check for an LSD, and jacking it up and spinning the wheels is the best way.

yes that's the best way.

attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

That doesnt make sense.

If you spin one wheel the other wheel will spin in the same direction if it's LSD.

If it wasnt originally lsd one wheel will spin in the opposite direction to the other.(single spinner)

However you'll find that most skylines come with lsd.

If your spinning one wheel and the other is spinning in the same direction but not at the same speed it might not be working properly.

if you wanna find out if your car has LSD then you could give your VIN to an authorise Nissan Japan service center (or any Nissan Dealer in australia) or infact anyone with the NSSAN Japan FAST system, they could plug it in and let you know if your car got one from the factory.

When I first got my car, I got it serviced and the dude goes "wow you have an LSD on yours". And I was like "huh? don't they all have em?" (coz I had a viscous LSD (2) on my ex-drift 180sx). He informed me that not all R32s came with an LSD, so I checked up on mine at my local nissan dealer n found out that mine had a factory LSD (dunno if its 1 or 1.5), and not only that it was a limited edition V Selection 2 which was given the trimmings of a GTR and LSD n HICAS n strutbars n all the goodies lol

Uhh.. i Thats exactly what i just said ... wasnt it?

Edit:..

Quote:

attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..  

That doesnt make sense.

If you spin one wheel the other wheel will spin in the same direction if it's LSD.

If it wasnt originally lsd one wheel will spin in the opposite direction to the other.(single spinner)

However you'll find that most skylines come with lsd.

If your spinning one wheel and the other is spinning in the same direction but not at the same speed it might not be working properly.

Thats pretty much the exact same thing i just said .. how does it 'not make sense'

lol now youve got me confused :D

The ECR33 (R33 GTS25t) has a factory LSD (8/93 onward).

From I think 95 onwards there was a factory option for an Active LSD which is obviously better than the standard LSD in that there is some sensors and a computer to control the way the LSD works.

The easiest way to tell whether you have active LSD is to look on the dash and if there is a SLIP or A-LSD indicator in the middle you have A-LSD.

Very few cars have the Active LSD so don't get your hopes up.

  • 2 weeks later...

Ok then.....

attempt to spin one rear wheel by hand, if the other wheel spins at the exact same rate, you havea LSD and its fine..

like I said before an lsd has both wheels spinning in the same direction at the same rate.

Single spinners also spin at the same rate but in opposite directions.

Hope that clears things up. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...