Jump to content
SAU Community

Recommended Posts

Here's Mafia....

I love these threads.

You love the noise - and put the BOV on the car to be a wanker. Its scientifically proven that if you're a wanker, the first thing you do when you buy a Skyline is install a vent to atmosphere blow off valve, to advertise the fact that you are indeed, a wanker.

Do you even know how the Nissan air intake system works? There is an AFM that measures the air entering the engine. The Stock BOV recirculates FOR A REASON. When your duck whistle, twisty whooshy twirly, dick pulling, sparkly, spinny, shiny, noisy, fuleh sic, wank off valve opens, it dumps air that the engine has measured and allocated fuel for. When only half the air gets into the cylinder because the air it measured is at the street corner where you sped up erratically and backed off because you saw some women on the corner, thinking that when they heard your BOV they'd get naked and run and dive into your car, the engine is now overfueled and under oxygenated, and stalls, backfires, and carries on. You know why? Because you've created a MASSIVE AIRLEAK on a system that will not run with airleaks.

Do you like that fact that you will foul your plugs constantly?

Do you also like attracting the cops attention?

Do you like the risk of being defected and having to pay money for a BOV that didn't need to be there?

Do you like the fact that you are just making skylines more hated? (And don't worry, its almost a guarantee that you'll drive through the main street of town making it release "because you like the wank off sound")

Do you like it how women love the sound, get naked and dive into your car as you drive past?

Do you think SAU will be happy about another "My car is running rough, I only installed a duck whistle, twisty whooshy twirly, dick pulling, sparkly fuleh sic wank off valve" thread

They should create a database script that bans people that install BOVs "just for the sound" or complain when their car runs rough...

I'm was running 300rwkw and had the stock BOV.

Good luck with it though.

:whistling:

Edited by WMDC35
Link to comment
https://www.sau.com.au/forums/topic/402756-help/#findComment-6404229
Share on other sites

Heard some guy telling his mate at drifting on the weekend.

That only Rb30's can dose.

Dont know what his reason was but he started going "zutttuuttuu zuttuuu" as the cars came around the corner.

I moved seats very quickly.

Possibly OP?

I think vl's etc dose from stock don't they?

Most that I have seen do anyway, but they might have been modded to do so...

Link to comment
https://www.sau.com.au/forums/topic/402756-help/#findComment-6404815
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...