Jump to content
SAU Community

One Piece Carbon Fibre Wheels Ready For The Road.

Dobz

By Dobz,
in General Automotive Discussion

 Share

Recommended Posts

Dobz Experienced

Dobz

Posted
Posted

http://carbonrev.com/

They finally have a wheel for release that will be allowed on the road, even though they only have one model of wheel at the moment. I was lucky enough to work at the engineering shop to machine up the inner and outer moulds for the wheel rim and machine up the little 7075 aluminium wheel nut inserts.

Hopefully they start making some that fit Skylines very soon.

Peter89 Proficient

Peter89

Posted
Posted

http://carbonrev.com/

They finally have a wheel for release that will be allowed on the road, even though they only have one model of wheel at the moment. I was lucky enough to work at the engineering shop to machine up the inner and outer moulds for the wheel rim and machine up the little 7075 aluminium wheel nut inserts.

Hopefully they start making some that fit Skylines very soon.

wouldn't the cost outweigh any benefits?

Noy Experienced

Noy

Posted
Posted

These wheels have been many years in the making...

The first design was so so, a little boring BUT

They are just about to release there new design, I have seen there new design in the flesh and they are impressive.. much better styling

Mass production is not far away so keep checking for updates on there website.

The Carbon Revolution is coming.........

  • 1 month later...
mad082 Grand Master

mad082

Posted
Posted

would be interesting to see how they handle. i think they would be different. i know it isn't really much of a comparison, but i've ridden on a few sets of full carbon bike rims and they are totally different to alloy rims. much stiffer/responsive

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...