Jump to content
SAU Community

Recommended Posts

Your "insult" is null and void considering your lemon of an attempt at Stagea ownership. With everything you fkd up on your old Stagea, having a go at me over the colour of my old Stagea is a pretty average effort, even by your standards :)

LolZ

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Your "insult" is null and void considering your lemon of an attempt at Stagea ownership. With everything you fkd up on your old Stagea, having a go at me over the colour of my old Stagea is a pretty average effort, even by your standards :)

Wow do you need some tampons for that vagina? Lol

Nice way to take a joke hahahahahahahaha

  • 11 months later...

Going back through this thread makes me laugh.

Anyway to getting to the point of why i'm posting.

I received a M35 today at my house...I'm going to name drop(rosella) so that if you wish to PM him and ask him who he used you can.

To say that I have never been more disappointed at the workmanship on a car before is going to be a big call.....this shop went full Re t a r d!

Firstly I'd like to say that rosella has done nothing wrong but to trust the workshop and "qualified" mechanic's he gave his car to.

So To start off(and this only get worse)
1/ Missing bolt on the back of intake bracket
2/ Loose top suction pipe hose clamp
3/ Suction pipe top bolt finger tight
4/ Suction pipe bottom pipe over tensioned....new stud needed as it was all but snapped
5/ Heat shields overlapping heat shield bolts....I might also add that they were rounded as well.
6/ Cross threaded Actuator bolts into the turbo...re tap needed.
7/ O2 Sensor way over tightened(well at least something was tight)
8/ After loosening the 2 bottom dump pipe bolts the whole dump pipe was flapping in the wind. Further to this there was a nut and bolt at the top that should not have been used at temp....the reason that a bolt was used was because they had drilled the thread through on the turbo rather than retapping it.
9/ Water pipe from the top not bolted on
10/ Oil line bolt not bolted on
11/ Turbo to exhaust manifold studs bolted up with ceased bolts from the turbo to dump side.....all were loose/finger tight with the exception of 1 bolt.
12/ Old line Banjo bolt missing one washer.....so it was pissing out oil everywhere. They tried to fix this by dumping a shit load of gasket goo over it.....this was there full re t a r d moment.....and everyone knows you never go full re t a r d!!!

anyway rant finished.......now to get the turbo back in tomorrow if I can!

Edited by Jetwreck

Wow.

Not a good job. At least we know its in good hands now. Disappointed From a place I thought better of too. However many have been stung by the first time M35 turbo job.

Edit.

I miss Sidius. This thread delivered.

I was very disappointed when I heard how this played out; I expect much better from professionals. Even after spending time speaking with the mechanic in question while the work was happening; it has ended badly.

There is nothing worse than paying good money, and trusting specialists with your pride & joy; only to have them abuse that trust & conduct themselves in such a deplorable manner.

There is no question that the individual who worked on this car did a disgraceful job, and should be absolutely ashamed of himself.

To then do even more substandard work, in an attempt to cover up the first lot; is simply unconscionable.

I actually found the missing banjo washer whilst I was helping Russel with another thing that they had left loose a couple of weeks ago.
Foolishly, I had hoped they'd used a new one; but no.

I hope once Rosella gets his car back from Craig, that he takes the photos of this mess to the owner of the business, and asks for an explanation.
He certainly deserves one.

As Alex has said; at least he can rest assured it is being done properly this time, and that the whole sordid business doesn't leave a sour taste in his mouth.

I and others have managed to do this exact job on our own cars, with no more of an advantage than these guys have; so the "but it's a hard car to work on" rubbish, doesn't wash with me even a little bit.

Also; Sidius was great.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...