Jump to content
SAU Community

Recommended Posts

Hello,

I'm planning to boost at about 25psi. I wanted to replace my BOV with the Turbosmart dual port ( at low psi, it recircule, at high pressure, it will open up and vent it for a sweet sound)

Or should I recirculate completely the system? I heard a recircule BOV will elimate the stalling issue at low rpm but from what I read, the oem bov hold its pressure better so you are always on-boost between gear.

Will I really feel that extra performance giving by a recircule BOV or its negligeable ?

Thank you very much for your input as I never droven an OEM setup and don't know how the boost/pressure feel.

So THAT'S what I've been doing wrong all this time?! Damn.

Better change to the flutter sound, that HAS to pull the chicks right??

:D

... On a serious note, if you dont want the stock BOV, upgrade to GTR spec (if you dont already have one), or recirculate the Dual Port. I actually use a dual port recirculated.. Looks pretty ;)

Why don't you just go with the proven stock GTR setup?

You know it's good... Not really sure why you wouldn't then use it.

Well.. it was made for 13psi.. not 25psi.. Not sure if it will hold up and honestly not interesting in doing the test myself jsut to find out I have to re-do it agian because its leaking.

Are you kidding?

They hold over 30psi and over 550rwkw. Seen it with my own eyes on 3 different setups.

No need to do testing yourself when there are 100s of people before you. There are countless users here all running stock items. Just go look in the dyno thread or search "GTR BOV" :thumbsup:

Are you kidding?

They hold over 30psi and over 550rwkw. Seen it with my own eyes on 3 different setups.

No need to do testing yourself when there are 100s of people before you. There are countless users here all running stock items. Just go look in the dyno thread or search "GTR BOV" :thumbsup:

Well No I wasnt kidding. I spoke about oem bov at our latest skyline meet and most people were anxious about runing oem over 17-18psi. I will look into it. thanks!

Bah don't listen to them. I bet they've never tried to do it. Just like people saying you need a aftermarket FPR and what not for moderate setups... Fact is if the stock gear is working fine - you don't! Save your cash :)

I ran 24psi/GT3040 through a single GTR BOV on my RB25, it would flutter ever so slightly so probably a needed to be a bit bigger, or go to dual BOV's.

Will I really feel that extra performance giving by a recircule BOV or its negligeable ?

Thank you very much for your input as I never droven an OEM setup and don't know how the boost/pressure feel.

Your stock bov is recirculating, so why replace it if it works fine? An aftermarket bov will a) get you defected, b) cause stalling issues and popping as it vents metered air c) cost lots of money d) make everyone think you are a dickhead.

So you are basically paying money to sound like a dickhead, get defected and make you car run worse. Seems like value for money I guess?

Not much will be lucky if it holds 1bar

Holds over a bar no problem.

What psi is the stock gtst bov good or recommended for?

Plenty, get a GTR bov if you have issues, they will run 30psi fine.

edit: on 18psi with a stock rb25 bov I get a tiny bit off flutter when I back off on a WOT gear change, but it flows plenty for the rest of the time.

Edited by Rolls

I run an aftermarket BOV

If your gonna buy an aftermarket one, run full plumback no atmo. You should still hear the noise if thats really of concern, it will just be slightly quieter then if it was atmo

I absolutely agree that the Stock BOV will hold fine, I just dont like the way they sound.

Right now I run 2 blitz and one is seized. And I'm having stalling issue hence why I looked into recir BOV. I have a BNR32 that his mild tuned already. But 1 summer ago when my both BOV were working and at 17psi I had zero issue.

At the moment, I had 3 options:

1) Run one blitz and one OEM

2) Run the Turbosmart dual port alone

3) Run the turbosmart dual port and one oem

My friend's car actually run 2 HKS atmo and one OEM but I think the atmo take over the OEM bov. I will simply install it and run the car without bumper and see what can stop my stalling issue.

Edited by cobrAA

Hi guys might be a stupid question but what model gtr bov should you recommend or are they all the same?

I got defected with mine venting to atmo, I have an aftermarket plenum, stock bottom and aftermarket top half.

If my intake doesn't have a port to recirculate can I plumb it into my airbox? Or will that be not enough to pass defect clearance?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...