Jump to content
SAU Community

Recommended Posts

Just an update, these are the bits that are left.

When I have a bit more time, I will create another for sale thread with pictures of these items, so it's easier to see all the items that are left and not have to skip pages for photos etc and ask the mods to lock this one

Splitfires to suit RB25 and I think RB26? - $400

Trust Greddy type R blow off valve - $200

Alloy radiator $150

Hybrid intercooler with some piping - $200

Apexi Pod $50

Nismo gear knob - $60

Gab height and damper adjustable Coilovers $600

Adjustable Rear upper Arms and traction rods $100 pair

R33 Front LCAs $100

Nismo Castor Rods $100

R33 front callipers, rotors and pads - $300

Front Strut brace - $80

RB25 Gearbox and Cusco Single Plate clutch $1500

R32 GTR front bar with N1 vents - $600

R32 GTR bonnet with Aerocatch pins $600

R32 GTR front reo - $300

R32 Cusco Full Cage with bolts, plates and padding - $800

Bride Recliner Drivers seat with bride rail - $400

R32 Gtr passenger seat - $200

R32 brick headlights - $300

R32 spoilerless boot - $200

R32 non rolling Shell. Is still registered, but obviously sold de-registered and will come with mod plates for rb25 conversion, gearbox, cage and turbo. Will take offers depending on what's left on the shell.

Advan 18x9.5 +22 and +38 with minimal tread $600

S1 3P Workmeister 18x10 +30 with 225's and 235's $2500

Happy to send at your expense.

Let me know what you are interested in and I will take better pics if you need.

Will hopefully have the cage out by this afternoon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...