Jump to content
SAU Community

Recommended Posts

My first R34 came with brand new Ziex, they were potentialy the scariest rubber I've ever driven on. Even on a bone dry road I'd have to be careful taking tight turns as the car would 4 wheel slide. And yes, a complete 'surprise' 360 was easily achieved in the wet.....from an unmodified n/a that's not good.

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

My first R34 came with brand new Ziex, they were potentialy the scariest rubber I've ever driven on. Even on a bone dry road I'd have to be careful taking tight turns as the car would 4 wheel slide. And yes, a complete 'surprise' 360 was easily achieved in the wet.....from an unmodified n/a that's not good.

Im surprised this sort of crap can even be sold - there must be some sort of contributing factors, If they are doing this on all cars so to speak then what the hell is wrong with these people. How many of the avg joe public even know what size rubber they need let alone whats good and whats not. Too bad if granny needs to squeeze the brakes in the wet.... I believe in driving to the conditions of the road and my car, the avg person dosent, They think a car is a car, Hence will stomp the bakes, cut people off or turn corners to fast in wet and without knowing whats what its a recipe for disaster.

i know its ridiculous...i dont understand how they are still being sold ANYWHERE.

fitted some ku31s , havnt had a chance to properly test them in the wet , but in the dry they are fantastic and in slight drizzle conditions they didnt slip at all, even on boost

i know its ridiculous...i dont understand how they are still being sold ANYWHERE.

fitted some ku31s , havnt had a chance to properly test them in the wet , but in the dry they are fantastic and in slight drizzle conditions they didnt slip at all, even on boost

The KU31's are a pretty decent tyre on a budget. Had several sets; they last pretty well & grip wet & dry. Not even too noisy.

I've got Kumhos on the CX-7 after replacing the Yokohamas, this was a big move considering I've always been a Yoko fanboi. To be honest, they're quieter, grippier and wearing better than the Yokohamas and weren't as obscenely priced. Definately changed my perception of the brand.

I've got Kumhos on the CX-7 after replacing the Yokohamas, this was a big move considering I've always been a Yoko fanboi. To be honest, they're quieter, grippier and wearing better than the Yokohamas and weren't as obscenely priced. Definately changed my perception of the brand.

+1

I was also a longtime Yokohama buyer; they crap on every Yoko I've ever bought.

i had ziex on 2 cars (at about the same time, since i was able to get them cheap). one were 235/45/17's on a magna, and the other were 195/50/15's on the missus SSS (stock suspension, wheels, etc). both where dead set slippery in the wet. weren't too bad in the dry, but the wet was pretty shocking. currently got toyo teo plus on the pulsar and they are much better. got some cheap nasty chinese crap on my commodore at the moment. they have more grip than the ziex did.

I'll get flamed for this but I've got 235/30/19 nankangs all around on the Z32 and so far they feel fairly good, only driven in the wet properly once with them, but it wasn't so bad.

I had Nankang S once on my 4WS 4th Gen Prelude.

> in the wet after crossing the Victoria Bridge Penrith and following a Vectra on a left hand bend, I lost control and did a 270

> unperturbed, the Vectra just drove away, still doing 60Km/Hr approx

> incensed with how these Nankangs with only 6000Km useage performed in the wet, I went to Blair's Tyres who are their agents

> Blair's rang Nankang and told them my story

> Nankang to their credit offer very good service but,

> they offered me another set of the same - Lol

> I sold the car - only because I was 'over it' of course

> told the buyer to be careful in the wet

get them to dial a little bit of camber out 1.25 is good and run some toe in on the rear i this will help traction in the wet and dry substancialy i run o.5 each side 1mm total with is more fro less grip for drifting but running 1mm each side will help a lot i could take corners at 60on a round about before mine wouls start to slip it has coilovers sway bars etc but u have to gently flow the wheel if u jerk ft or brake entering the corner or mid corner u shift the weight of the rear to the front and can cause a spin very fast .....

Since we've moved onto the topic of crappy tyres... I've never understood why people buy sports cars and then buy cheap, crap and potentially lethal tyres. What's the point of doing that when tyres basically make or break a car? There are plenty of decent mid-spec tyres available that won't break the bank and that will at least give decent levels of handling.

Since we've moved onto the topic of crappy tyres... I've never understood why people buy sports cars and then buy cheap, crap and potentially lethal tyres. What's the point of doing that when tyres basically make or break a car? There are plenty of decent mid-spec tyres available that won't break the bank and that will at least give decent levels of handling.

Tyre are consumable, other mods are considered to be more permanent.

Terrible oil will cause damage to your engine regardless of how you drive it. Terrible tyres cause control of the car to be lost at a lower threshold.
Edited by *LOACH*

falken Ziex tyres are fine... its the rear width...

I was running 17' falken 235/45's and never a problem even when they were worn out...

---front tyres wore on the inside coz of camber then were switched to the back

that said it had bilstein suspension, and always handled twice as good as stock susp.

I liked to go sideways and in the wet it was pretty fun. - did hit some oily patches of road and they become dangerous(like every tire)

wider rear tyres(265's) means less grip in the wet.... water cant get out of the tyre...

235's on the back would give you more grip in the wet.

this is on r33 gtst, 3' exhaust.

falken Ziex tyres are fine... its the rear width...

I was running 17' falken 235/45's and never a problem even when they were worn out...

---front tyres wore on the inside coz of camber then were switched to the back

that said it had bilstein suspension, and always handled twice as good as stock susp.

I liked to go sideways and in the wet it was pretty fun. - did hit some oily patches of road and they become dangerous(like every tire)

wider rear tyres(265's) means less grip in the wet.... water cant get out of the tyre...

235's on the back would give you more grip in the wet.

this is on r33 gtst, 3' exhaust.

ziexs arent fine. they are terrible , and this has been proven time and time again among hundreds if not thousands who where unfortunate enough to buy those tyres.

good luck with your crashing into $hit goals of 2013

falken Ziex tyres are fine... its the rear width...

I was running 17' falken 235/45's and never a problem even when they were worn out...

---front tyres wore on the inside coz of camber then were switched to the back

that said it had bilstein suspension, and always handled twice as good as stock susp.

I liked to go sideways and in the wet it was pretty fun. - did hit some oily patches of road and they become dangerous(like every tire)

wider rear tyres(265's) means less grip in the wet.... water cant get out of the tyre...

235's on the back would give you more grip in the wet.

this is on r33 gtst, 3' exhaust.

The ziex i had were 235 and they were shit, as were the 195s on the missus car, and that was the standard size. Every other tyre I've had on the missus car has been fine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...