Jump to content
SAU Community

Recommended Posts

hi all im new here

im interested in getting a stagea by the end of the yr dont no a heap about them only no a lil from wiki and some reading though some of the posts on here, i do like the idea of a wagon with a lil bit of go would like to hear from ppl that own one what is the best stagea model/yr in regards to modification ability, stock speed and perfomance

i def want a awd and turbo, does that narrow it down a bit.

also after looking into them a bit iv seen that alot of the stuff that fits onto a skyline will fit a stag is this true is it pritty much same mods can be made to a stag thats done to a skyline.

Link to comment
https://www.sau.com.au/forums/topic/408005-whats-better/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Most Stageas brought into Australia will be awd and turbo. Read the section above on buying a C34. If modifying is your thing C34s are easier to modify than the later V6 versions but anything is possible if you have the budget and will.

Series 1 C34 Stageas have the R33 motor and have the problem in auto version that the ecu contains the auto ecu and is not easy to upgrade (going manual solves this).

Series 2 C34 have the Neo engine and can be Nistuned.

If the budget allows start with a 260RS (RB26DETT, manual box, brembos etc)

Unless you are dead set on doing all the work yourself you could save money by buying a modfied Stagea from this forum - there are usually a few for sale at any time.

Good luck!

Link to comment
https://www.sau.com.au/forums/topic/408005-whats-better/#findComment-6506495
Share on other sites

My suggestion is to drive them both, I think you will find the NM35 will be the better buy now you can pick them up as cheap as the older C34 models. PM35 is still a little pricey but you get the 3.5L VQ35.

Link to comment
https://www.sau.com.au/forums/topic/408005-whats-better/#findComment-6506550
Share on other sites

206kw

Volvos

Camrys

Heaps

Stickers NISMO!

But seriously, have a look on carsales mate, you will soon figure out what you like, what you don't like. Please use the search function to look up common questions- its not the first time someone has tried to get more power outta a RB25DET. If your stuck on Manual then your only option is C34. If you don't mind auto, then M35 is also available

http://www.carsales....ice:Min,Max~0.5

Link to comment
https://www.sau.com.au/forums/topic/408005-whats-better/#findComment-6506774
Share on other sites

I have a fantastic NM35 Axis Autech for sale that I am sure you will love.....

http://www.carsales.com.au/private/details/nissan-stagea-2002-13142658?base=1216&vertical=Car&cr=0&eapi=2&__N=1246+1247+1252+1282+1216&find=yge062|CarAll&silo=Stock&num=15&sort=default

You should also find a thread on page 2 of the Stagea Forums discussions....

Link to comment
https://www.sau.com.au/forums/topic/408005-whats-better/#findComment-6506872
Share on other sites

C34 has a lot more off the shelf parts if you are looking to mod.

M35 is the quicker car in stock form for sure (I was originally looking at buying a C34 prior to buying my old NM35) unless you are looking at the 260RS.

If you want manual, only choice is C34.

M35 is much more refined and comfortable as you'd expect from a newer model.

Looks are subjective.

Perhaps you need to go to a few dealerships and take a few examples of each model for a spin?

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/408005-whats-better/#findComment-6508324
Share on other sites

so stock both of them are as fast as each other ?? is the m35 the only one with a split boot opening? anyone own 1 or both of them what are the good and bad points of both models c34 and m35

If you want to modify one then it hardly matters how they go in stock form. They are both heavy and are compromised by that fact.

If you want a manual then it is an easy decision. If you want to modify the car, C34's are easier to source parts most particularly engine management and are generally easier to work on.

If you value more creature comforts and are happy with a slushbox then the M35's are going to look more attractive.

Both are good but they are different enough that all C34 owners are like saints and all M35 owners are devil spawn. :devil:

Link to comment
https://www.sau.com.au/forums/topic/408005-whats-better/#findComment-6508405
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...