Jump to content
SAU Community

Recommended Posts

Is there a backlog for the approvals in "Projects, Overhauls and Build-ups" section?

Maybe the mod for the section is on a break?

I put up a new project over a week ago and hasn't popped up yet and the most recent approved project I can find was from about a fortnight ago.

Or did my thread mearly get turfed? :wacko:

Cheers

Joel had the same issue recently, it took some time to get approved but it went through and was worth the wait!.... I assume with the mods working hard on the Nationals etc there is just a lot to do :)

Look forward to your build thread :yes:

yep - mods are extemely busy at the moment due to nationals was the answer i got.

Be pateint or pm a supermod if you see one online - Ash was nice enough to approve mine (thanks again ash :-)

Edited by wedge_r34gtr

OK, significant backlog cleared, let me know if some have been missed.

Also, the best way to chase up an unapproved thread is to contact the section moderators first: N1GTR, Col-GTSX. Or another way is the "report this post" link which also goes to the section moderators....best way to spread the workload across the volunteer mods

  • 5 months later...

No, the problem is there is no thread started by you in either the build or motorsport build section. Not sure what happened but there is nothing there to approve. If you are concerned about the post just do a short intro in the first post and then once approved you can add more info.

Mate, I'm stuffed if I know what is happening....but there is no queued thread by you in motorsport builds from the last 2 days.

Can you start the topic somewhere else and send me a link, I will move it over to Builds

umm yep, you can't edit a post more than a couple of minutes after when you post it; we had to introduce that a few years ago to deal with dodgy trading.

I've removed that first line now too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...