Jump to content
SAU Community

Recommended Posts

So my understanding of this thread is that this fuel isn't recommended for non daily driven cars?

My cars lucky to be driven once a month sometimes, would this cause the fuel to go off?

If you ran 98 it could go off... I don't know how you got that information out of this thread.

Yes, there is a chance the fuel could absorb water, so make sure you don't stick the hose in the fuel tank. :P

There was mention of fuel absorbing water and rusting injectors in non daily cars so just clarifying

I think you must have read what I wrote. Toshi tuned my car and when I asked about E85 he said its no good for a weekender (or less). I'm just going off what he said to me; water absorb = more chance of knock & potential to rust injectors if the car sits. I don't know anyone who's had that problem and I'm not going to let it worry me at all.

I'm tuning on e85 later this year because everyone seems to love the extra knock protection, lower EGTs, Higher power and it's readily accessible for me so why not!

i odnt no about E85 going off - i asked the same thing and he said he has a rally car that lives at the work shop and comes out jumps on the dyno for a check every 6 months or so or before meets and the e85 levels never drop and is still running after 5+ years of competing - - thats his experience anyway - i have just been told not to let it sit in plastic containers

I think you must have read what I wrote. Toshi tuned my car and when I asked about E85 he said its no good for a weekender (or less). I'm just going off what he said to me; water absorb = more chance of knock & potential to rust injectors if the car sits. I don't know anyone who's had that problem and I'm not going to let it worry me at all.

I'm tuning on e85 later this year because everyone seems to love the extra knock protection, lower EGTs, Higher power and it's readily accessible for me so why not!

My customer used E85 and he did not drive 2weeks then his car start engine knock (He could not hear knock but his ecu is power fc so he can see how many knocks).

He refill E85 then stop engine knock.

I think fuel pump and injecter is not problem.

I've had zero issues. If the engine is knocking on ethanol something is very wrong, mine will cruise on 20:1 without ping. Going by the PFC for knock doesn't sound very accurate...

Unless it was a bad batch of ethanol? I usually buy from high turnover servo's but I have never had an issue with this either. (and I have filled many hundreds of times)

Depends where you buy your e85 from

I've heard of a few united servos now having bad batches of fuel where the e85 has dissolved everything in the servo tank coming out like rust water blocking pumps and injectors to the point where the car won run

Caltex eflex haven't had issues ever

Is that what you run micko?

Sounds like they never upgraded the tank at the servo then, which is very illegal. Caltex would have the same issue with the old steel tanks, but they were obviously a lot more proactive with their rollout.

Yes mate been on eflex for ages with zero issues :)

Depends where you buy your e85 from

I've heard of a few united servos now having bad batches of fuel where the e85 has dissolved everything in the servo tank coming out like rust water blocking pumps and injectors to the point where the car won run

Caltex eflex haven't had issues ever

Is that what you run micko?

I was reading some yanky info on e85 the other day, and it mentioned that when installing fuel pumps in tank to insure that the terminals on the pumps and line had a non conductive cover or coating over them, because e85 is a conductive fuel and can short out in the tank and create fire.

Is that true I've never heard of anything like it before?

Exactly! Even if it did you got more power to drive away faster to extinguish flames :D

There is no oxygen in the tank, so no chance of a fire. Science! Anyway, my car exploding is of no concern to me if it goes faster :)

I was reading some yanky info on e85 the other day, and it mentioned that when installing fuel pumps in tank to insure that the terminals on the pumps and line had a non conductive cover or coating over them, because e85 is a conductive fuel and can short out in the tank and create fire.

Is that true I've never heard of anything like it before?

Lol. Mythbuster that shit. :P

The only way it becomes conductive afaik is when water is added. Probably best to just use the sealed Walbro 460L e85 pump to be safe.

I would think after 5 years on ethanol in my daily I would have dispelled most of the myths surrounding it, my car has not caught fire ever, the Walbro 255's are still running strong, and the fuel tank hasn't rusted away. I have also never cleaned the fuel filter... ;)

I was reading some yanky info on e85 the other day, and it mentioned that when installing fuel pumps in tank to insure that the terminals on the pumps and line had a non conductive cover or coating over them, because e85 is a conductive fuel and can short out in the tank and create fire.

Is that true I've never heard of anything like it before?

There is no oxygen in the tank, so no chance of a fire. Science! Anyway, my car exploding is of no concern to me if it goes faster :)

I am pretty sure there is oxygen present during installation of the pump.

I say plausible.

There will be air in the tank above the fuel but the vapour generally isn't as flammable in an enclosed space as people sometimes think .

The worry would be what was causing arcing across the electrical connections that may be exposed inside the fuel tank .

You'd think a pump drawing 18-20 amps would be more likely to do this than one drawing 8.6 amps .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...