Jump to content
SAU Community

Recommended Posts

Just thought Id let you guys know.. Today I had my exhaust off and noticed all this stuff blocking my cat converter, luckily I managed to poke it all out with a screwdriver.

It looked a bit like honey comb and Im sure it wouldnt be good for exhaust flow. Just thought Id give fellow SAU members the heads up, I guess you need to check these things!

Link to comment
https://www.sau.com.au/forums/topic/414333-cat-converter-maintainance/
Share on other sites

It looked a bit like honey comb and Im sure it wouldnt be good for exhaust flow.

That is what the Cat Convertor is - a honeycomb that acts as the catalyst...

So you've effectively "gutted" your CAT by the sound of it, so it's not no longer a CAT - It's just a piece of pipe...

I really hope this is some kinda joke...

Whoops!

Words like, "poke", "stuff", "screwdriver", "maintenance", "pipe", "flow", "blocking" are about to...

prompt response words like...

"illegal", "rofl", "crazy", "defect", "rich", "knucklehead" as well as "whoops"

Now that I've got my breath back, can I ask you if you've been running rich? And I mean really, really rich?

A little bit of knowledge - or in the case, no knowledge - is a dangerous thing.

The honeycomb is supposed to be there - it's the catalyst that does the job of converting - hence the name "catalytic converter" - the noxious exhaust gases (NOx, SOx, etc) into more environmentally friendly compounds.

How did you think the honeycomb got there if it was not meant to be there? It doesn't exactly look like your regular carbon build up...

A bee went up through my exhaust and formed a colony, so I've been told :yes:

Tis summer, and the Metallic European Wasps are out.

Beware that your replacement metal catalytic converter doesn't arrive with the honeycomb wasp nest inside - that sort of 'blockage' is harder to remove before instal!!

jk

dont know about maintenance as such but ive read that you dont expose the cat to unburnt fuel, leaded fuel, overheating (can melt the substrate)coolant and probably heaps of other things i cant remember, all the above can lead to a blocked or collapsed cat

dont know about maintenance as such but ive read that you dont expose the cat to unburnt fuel, leaded fuel, overheating (can melt the substrate)coolant and probably heaps of other things i cant remember, all the above can lead to a blocked or collapsed cat

Also big screwdrivers and too much poking

Also big screwdrivers and too much poking

ha ha! yeah, there is heaps of aftermerket hi flow cats on the market that its not worth the agro if you are caught with a gutted cat

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...