Jump to content
SAU Community

Recommended Posts

Wen't for a long drive on the weekend to Londsdale (about 25-30kms) and we were giving it some stick on the way (Me: R32 GTR, friend: R32 GTSt). All was fine until we took a wrong turn and ended up near a factory of some sort and had relatively no traffic. As you could imagine, we went for a quick burst and the next thing I know I hear a clunk and a rattle then something bouncing out from under the car!

It turns out the idler bearing for AC belt siezed and just ripped off, my friend almost had a new hole ripped out of his intercooler and missed it by a couple of metres.

Anyone else had the feeling of 'Oh shit!' when driving (mechanically related) not accidents...just parts falling off the engine...hehe :wassup:

fark had that happen on my old cc gsr while back redlined in 2nd and the clunk rattle and bang the bolt that holds the alternator went god knows where, i live up north of adelaide and this happens 3am in victor harbour drove home wid no tunes that nite

hope you got it fixed

I was driving down port road a few months ago and the bolts out of the top bush in my front suspension fell out!! lucky i was going very slow or it could have been very nasty. My cars has some sort of camber adjustment kit on the front and whoever put those bolts in did a shithouse job, they were the wrong type and had fken grease on em.

I was in the car with my dad a while back, he had a new BA Falcon, as we were driving along, heard a big clunk, but we thought it was just a branch as it was quite windy that day and there was debris all over the road. Eventually the power steering went, the battery light came on, it wouldnt idle, everything was phucked. Turns out the idler pulley had come clean off and caused the rest of the drive belt to get shredded up!

I had an alternator bolt drop off on my old Integra VTi-R. Scared the shit out of me as i was redlining at 8000rpm and the bolt hit the floorpan so loudly.

I've had a brake pad come off in my first car, Prelude Si. Sounded like a train. :)

had a mates 180 flywheel obliterate, some bits went thru his bonnet, some at his feet thru the firewall, and the other 1/4 we found 1 month later wedged behind the ecu, its almost back on the road after 6 months, it also cut straight thru the steering and exhaust and bent the turbo, cut a fuel line and damaged plenty of hoses... was a mighty bang, also chopped halfway thru the left chassis rail

Intercooler pipes popping off at high boost and pushin hard always jolted me into thinking i blew something

Once on the freeway on the way home one latenight, it had been a long while since pushing my car abit, so in 3rd i gave it a tramping when seconds later *PHOOOMP* the pipe from the front mount exit to the second section that leads into the engine bay had popped off, then dragged on the ground, snarled on something and ripped it off...went over the pipe with my front and rear wheel

i squashed it gewd :)

abit of a pain looking for a pipe on a cold midnight evening on a freeway :S

lucky i dont have an AFM

been driving the 4wd to go away for the weekend.. we were just about to hit the freeway when the back wheel's studs sheered off, the back end grazed along the road and the wheel overtook us, hit a tree and flew about 5-10meters into the air.

we looked out the sunroof to see a wheel coming down towards us. It just missed the car door bounced again and landed in front of the car on the road. Thankgod this didnt happen when we were out in wh00p wh00p 4wd'ing.

also had my intercooler pipes burst loose when i was under full load in the 32.. scared the shit out of me for a minute or two :)

Shaun

Ended up replacing all belts because the AC belt rubbed against both the timing belt and the power steering...while I was at it, I wen't for the full service so there goes my 100K kms service ;) (I doubt my car was legit at 64K kms).

Oh well...at least I have peace of mind now!

Now...on to fixing more important things...like my clock :D

Blew a diff centre at the traffic lights, loudest rumble/crunch I've ever had.

Blew a spark plug out of a motorbike head at 140kph, on a twin cylinder, that was pants $hitting stuff, thought the demons of hell had been let loose, its right under your nose, next to your head, the sparkplug is still in orbit somewhere.

Used to have a Mini Clubman GT 1972, driving on the freeway @100km/h taking a swooping bend, and realise I have no steering .... luck was on my side, I had just enough steering to get me through the bend, and my mechanic was virtually a straight run with no turns about 10k's away.

Was down at Calder having a few runs one Fri night... did my last run and popped the bonnet to let it cool a bit and found oil EVERYWHERE! Panicked badly for a few minutes trying to find the problem before I realised I hadn't replaced the dipstick properly... very messy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...