Jump to content
SAU Community

Can't Undo My Diff Fill Bolt

SiR_RB
 Share

Recommended Posts

Shoota_77 Veteran

Shoota_77

Posted
Posted

Leverege is the answer!. I presume it's a 1/2 plug where you use the breaker bar or ratchet straight into the plug? If yes, put the breaker bar on it and put and extension onto the breaker bar (piece of pipe). They get overtightened when reinstalled for some reason. They really only need to be firmly tightened not done up like they're holding the whole car together like they seem to be most of the time!

Otherwise you could try a bit of heat (a bit, not glowing red!) around the bung. This will hopefully soften any seallant that's on it and enlarge the housing a little to loosen it as the alloy will expand quicker than the steel plug.

Good luck!

Shoota_77 Veteran

Shoota_77

Posted
Posted

If you can get someone else to maintain the pressure on the breaker bar while it's being heated that will make life easier and you don't over or under heat it. IT will let go as soon as it reaches the right temp. Don't burn him though, he might not come back....

Duncan Grand Master

Duncan

Posted
Posted

Ok so I jacked it up, and with afew extra inches or leverage and using my foot (nearly doing my back lol) she cracked, you beauty !!

good news :)

I was going to say...be careful with 1/2" extensions/breaker bars etc. Often the plugs are a little round already and you can really f**k it.

You can get 13mm square fittings for this exact job. They are a lot tighter fit and won't round it off. The one I have is 13mm square at one and and 19mm hex at the other so you can put a big spanner or bar over it to get the leverage you need.

But I'll be f**ked if I understand why they are alawys so damn tight! Even when I put them back in a little loose, it takes f**king superman to take them off again!

wouldnt go crazy with the leverage as you might strip the 1/2" socket, tap and heat works for sure

damn straight, good tips.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      The Evolution Of "night Fury"

      By Murray_Calavera · Posted

      Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • niZmO_Man
      Dumb rich kid tries modding for the first time

      By niZmO_Man · Posted

      New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Just planning to have the wiring neat and hide as much as possible.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...