Jump to content
SAU Community

Injectors For My Gtr

fletch63

By fletch63,
in Engines & Forced Induction

 Share

Recommended Posts

fletch63 Collaborator

fletch63

Posted
Posted

Hi all,

Hope I can pick someone's brains

Just wondering what injectors I should upgrade to.??

Its a 33 GTR with 2860's and PFC

All else is standard except 3" and pods.

What would you guys recommend boost and power would be with my standard injectors ??

Thanks in advance

Cheers

Link to comment
https://www.sau.com.au/forums/topic/418792-injectors-for-my-gtr/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

I was going to say, almost regardless of what specific turbos and other minor mods, surely you're going to get told to buy some ID1000s simply because they will still work really well even at half their capacity and will provide you the room to use E85 if you get a hankering.

fletch63 Collaborator

fletch63

Posted
  • Author
Posted

I was going to say, almost regardless of what specific turbos and other minor mods, surely you're going to get told to buy some ID1000s simply because they will still work really well even at half their capacity and will provide you the room to use E85 if you get a hankering.

Way too big!

I was thinking 600 - 700

Looking at 350kw at wheels

wedge_r34gtr Mentor

wedge_r34gtr

Posted
Posted

Way too big!

I was thinking 600 - 700

Looking at 350kw at wheels

Theres a fair difference between -5 & -7. -7's won't get you to 350kw without E85. I suggest getting the serial number off the turbo and working out what you have.

ID1000's are a good injector choice as they allow headroom for further upgrades.

However 600's will give you 350awkw on 98 no worries...i'm about to put up a brand new set of nismo 600cc's for sale if your interested.

wedge_r34gtr Mentor

wedge_r34gtr

Posted
Posted

Not way too big. As I said, according to the experience of others, they will work just fine, even if only loaded to 50% of capacity. Do a google search or a search on here for the terms "ID1000" and "idle".

My id2000's idle perfect, so a clean idle with id1000's would be a walk in the park.

fletch63 Collaborator

fletch63

Posted
  • Author
Posted

Theres a fair difference between -5 & -7. -7's won't get you to 350kw without E85. I suggest getting the serial number off the turbo and working out what you have.

ID1000's are a good injector choice as they allow headroom for further upgrades.

However 600's will give you 350awkw on 98 no worries...i'm about to put up a brand new set of nismo 600cc's for sale if your interested.

how many dollars?
Piggaz Grand Master

Piggaz

Posted
Posted

Way too big!

I was thinking 600 - 700

Looking at 350kw at wheels

Listen to those who have the experience. ID 2000's Idle and drive better than Sard 800's (first hand experience). Injector technology has come along way since the "Sard/Denso/Nismo whatever's" were designed.

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

ID1000s are the only injector you need to use. why does it matter if its too big ? too small? a id1000 injector will idle a 2000cc engine better then any of the old out dated injectors.

stop wasting time and order a set today.

I used them in my 300rwkw rb2630 Nissan 350z, and its perfect.

AngryRB Grand Master

AngryRB

Posted
Posted

Get ID 1000's. They are proven and almost everybody uses them

i can vouch for Xspurt1000's, im making 320kw with Eflex and there at 70%, so you will have enought for 350kw..

they idle and run great.. :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...