Jump to content
SAU Community

Recommended Posts

Not sure on how much fuel you're going to save by swapping but driveability between the two is night and day. Having gone from Sard 800's to ID 2000's there is a significant difference between the two.

Look my injectors idle perfectly and run smoothly (so I think anyways havent really been in a car with id's)

Just get shitty economy. I think im just bitching coz its become my daily for the next month or so

Nothing but problems? Problems like what?

wrong reply lol

alot of failures and having to be replaced. 1000cc and over seems to be where the issues are.. buy 1000cc and you get 6 x 1000cc and 3 only flow 500cc

this has all been on E85 tho so could be part the cause??

Edited by Frosty

And you should have probably returned them, as even Bosch advise less than 2% variation.

You sure they were legit?

these werent mine....and yes returned to fail again. They are still sitting at a workshop here in sydney (half a bucket full to be exact) of various different sizes that have failed under high hp!

all of them in 700hp and above cars

hence why i was asking the question

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...