Jump to content
SAU Community

Recommended Posts

Cool! Should push the bar more often (or pull it), you've probably got more in you than you think. Watch how light your old weights will feel next time!

I think you are contradicting yourself a little, you are worried about weaker muscles fatiguing before your back does yet you aren't concerned the smallest muscle which plays a big part in the dead lift letting you down

Straps and suits can add a lot of weight to te bar to help increase your overall lift

There's always forearm exercises that can be done...

During repping sets you could get maybe another two reps or even more with straps as your pure focus is on moving the bar not holding on for dear life

Nice work all round guys.

Interesting that you're the same height and weight as me yet pulling a ton more, granted I have some issues I'm dealing with but it's still a top lift in my opinion so well done.

What would you "normally" weigh if you weren't doing weights? If I'm just running and no weights I drop down to a flat 80, as low as 78 as I'm a fairly light build guy normally.

Moving to a 3x8 routine from 5x5 has been "fun" lol

I think you are contradicting yourself a little, you are worried about weaker muscles fatiguing before your back does yet you aren't concerned the smallest muscle which plays a big part in the dead lift letting you down

Straps and suits can add a lot of weight to te bar to help increase your overall lift

There's always forearm exercises that can be done...

During repping sets you could get maybe another two reps or even more with straps as your pure focus is on moving the bar not holding on for dear life

That's because I'm not going to injure myself if my grip lets go, but if my core doesn't stay tight during the lift, my back will take the brunt of it or I'm robbing myself of potential during lockout..

I should mention that I haven't had any grip issues since switching to mixed grip with chalk. My back is always the first to fatigue these days; it would have to be a high rep set of a very heavy (for me) weight before my grip failed. I just think it defeats the purpose of a compound movement if you use equipment to work around a group of muscles involved in that lift; bandaiding weakness rather than addressing it properly.

  • Like 1

Markos, at what level do you think a lifter should be using a belt for deadlifts, if at all? I see countless vids on YouTube of people using belts, when they are 1RMing around the same as me or less...makes me wonder if I'm not taking a precaution I should, or if I should be continuing until I find a reason to need one...

Good question. Max deadlifted 240kg before a belt, Martin 272.5kg, Zoran 280kg.

They have now obviously added belts.

Konstantinov doesnt like them for deeds, he has pulled 426kg without one but wears one on squats.

I say try one and see if you like it

Birds/Dan, cheers for the positive comments guys.

Dan, I fluctuate between 88 and 91. If I didn't train regularly I'd be low 80's. Last time I didn't train regularly was over 15yrs ago. Prior to regular weight training I did years of paddling, surfing etc. Lots of back exercises.

During repping sets you could get maybe another two reps or even more with straps as your pure focus is on moving the bar not holding on for dear life

The issue is being weak or bad technique or both. Piss weak grip has to get stronger. Straps won't let that happen.

Good form with deads involves keeping tension in the arms and gripping the barbell with force.

Bad technique is likely a source of so called grip issues. Any slack in the arms prior to pulling the weight and cause a loss of momentum. food for thought.

Not about being weak at all, anything around 200kg and up, unless you are superman your grip will start giving up if you are doing reps

It's about being smart knowing you could lift more, more safely focusing on technique of a good lift rather than worrying about dropping the bar or putting your back out.

Have you guys actually tried straps? I only use them on deads and shrugs and on the heavier sets but knowing how much they actually benefit a lift wouldn't consider not using them. At the end of the day most guys here I see trying to get stronger on the deads and straps will aid that 100 percent

I've been known for my forearm size by friends and gym buddies but use straps for that edge, unless you want to be a pro powerlifter I think you are mad not to use them as you can add more weight to the bar and really work the back muscles harder

Even though I can only pull 190, my grip feels like it has another 50-60kg in it at the moment. Mixed with chalk shouldn't leave anyone with grip issues. There's no one who I have taught that grip to from the start, who has grip issues. I imagine the only ones who would have grip issues with only chalk and mixed grip, are those who have depended on straps for a long time.

There's simple evidence in Markos' clients...not all of them are pro powerlifters, but I doubt he would have anyone using straps on deadlifts, and his interest is in getting people as strong as they can be. Dependency is weakness. It's a fake kind of strong IMO, if you can't do the lift without the dependency.

You guys have obviously never used them because you would know the 'edge' they give. You think chalk helps? Why do you think they are banned in powerlifting? 190kg on the bar for 5 was my pb

Hey don't get me wrong I'm not telling you what to do, all I'm doing is sharing what I know works for me and all the other guys I've trained heavy with in the past

Anything to make lifting more comfortable and get your weights up why not utilize it?

Sounds like personal preference. If you're not training for comps I say do whatever the hell you want. I wear gloves because I prefer it, you guys have mentioned it will be an issue for me, the apparent issues are not as important to me as the benefit I get, so I wear them.

I don't see straps being any different.

Action Dan they must think they are pro powerlifters with their strict rules

I was into bodybuilding not powerlifting so I used them to have hands like hooks which helps take the weight the back muscles better

Sometimes I used them on lat pull downs when doing around 300lbs

I see why they say don't use them, as the idea is to try and make the whole body strong and you're kind of working around a limitation.

But realistically, for anyone not competing it makes 2 tenths of f**k all difference so do whatever you like.

I'm guilty of this as well though, we all get caught up on specifics of things that probably don't matter that much to non competitive guys like us.

Edited by ActionDan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...