Jump to content
SAU Community

Recommended Posts

Yep and all the units have CAN controllers to report if there working or not, and centralized everything in the AV Unit. Unlike the non bose, base units.

Check out the US manual and you can see the sort of complexity your dealing with...

http://www.nicoclub.com/FSM/G37/Coupe/2009/AV.pdf

Here's a fun thing to look at. Turn the car on, turn your audio off, press and hold settings button (bottom left, big button) then spin the volume control. Then practice your Japanese, i'll try and get my friend to translate it and put some screen dumps up. Definitely useful if you start splicing stuff into the car and you want to make sure it still works.

It will bring up the diagnostic screen and show you whats connected. I pulled the TV unit out the other day to have a look inside to see what chips were on it, some TV tuner micro chip boards follow a standard plug and play design for the tuner. No luck, recognized half the chips on the mother board, but need to know the pinouts are on the connection, If i had the Japanese manual for the actual car then i could get somewhere,

But does show up clear as day on the diagnostic screen that it is not plugged and simplifies the TV/AUX button so it just goes to AUX and you don't have useless fuzzy TV screen stuff. And there is tons of room in the boot back there to fit something in there...

I've seen lots of posts in the states with guys porting CarPC's in there and using Centrafuse, splicing into the unit either with the reverse cam or GVIF boards and then hooking into the OEM touch screen or adding an overlay over the top.

But yes definitely in the $3k territory plus fitting.

mike lo , are you in vic at all? (and if you are do you deal with me.)

--

the above post is pretty much correct. xanavi (hitachi) are very closed about who has access to FSMs for those units. I have tried several times without success to get info on that unit. at least with the clarion (non nav) I can get info .

Hey Chris,

Interested to know what you think would happen if someone managed to capture a HDD image from a 2009+ NAVI optioned local Murano Z51 Ti, Navara STX-550, 370Z or Pathfinder Ti R51? Do you think the image would even boot?

I assume the buttons would still present a fairly major challenge since they all appear to be in different places.

  • 1 month later...

Had a chance to buy this the other day

Nissan Infiniti G37 CONT ASSY-IT MASTER HDD car Navigation 25915 1MA4B 1JG0A 1JA0A US version

The price was less than $400 delivered.

Would it have been any use to us?

  • 2 weeks later...
  • 2 weeks later...

Is the 2010 V36 very different to the 2008?

I found a 2010 coupe on Carsales with Aus GPS that looks to have come with bose/jap nav.

http://www.carsales.com.au/dealer/details/Nissan-Skyline-2010/AGC-AD-14419450/?Cr=17&sdmvc=1

146970798.jpg?height=700&aspect=FitWithi

Not one of mine. I have a garmin version sitting here that I am going to put in production though . I know whatbthTvis and the are prone to failing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...