Jump to content
SAU Community

R33 Stock Bov Flutter Sound - Whaddaya Reckon Of This?


Recommended Posts

Techinically its not legal as its making noise.... You will soon get over it as it will get old quickly!

This will not get the bishes moist!

  • Like 1

To your dignity.... yes....

There are SO many topics on SAU about BOV's and not running them, blanking them etc............

My understanding is that you could bend your turbo blades. By Blocking off the BOV the built up pressure that normally gets released to atmosphere or recirculated, has nowhere to go but back though your turbo and as such temporarily stalls the compressor, which can bend or brake the blades, and the stalling of the compressor is what gives the flutter sound.

  • 3 weeks later...
  • 1 month later...

Lawl! These threads always deliver!

But the whole flutter thing will soon be annoying for a daily drive!

AND you can get EPA's based on it anyway as its still creating a sound!!

In other words, DONT DO IT!

You f*#@Kin idiots..... The 'flutter' sound is called compressor surge. it is NO GOOD for your compressor blades, it slows down your turbo from spooling in between gears and in worst cases, f*#ks up your compressor blades.

Sometimes when people get too ambitious with sizing their aftermarket turbo and get the housing sizes wrong, or over fueling at idle because they didn't reconfigure their fuel map properly after they fit a bigger turbo, compressor surge OR 'flutter' is the result.

The whole purpose of having a BOV is to release the excess boost so it doesnt slow down your turbo in between gears.....its for response.....WTF would you sacrifice response for a sound ?????? fu*kin idiots

Man, I really wish these kids learn about the fundamentals of engine mechanics before they make a total dick of themselves or worse, totally ruin their cars.

Edited by NATAS

You f*#@Kin idiots..... The 'flutter' sound is called compressor surge. it is NO GOOD for your compressor blades, it slows down your turbo from spooling in between gears and in worst cases, f*#ks up your compressor blades.

The whole purpose of having a BOV is to release the excess boost so it doesnt slow down your turbo in between gears.....its for response.....WTF would you sacrifice response for a sound ?????? fu*kin idiot.

You sir are a f**kwit

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...