Jump to content
SAU Community

Recommended Posts

Geez your a rude bastard Pete, 3 wide and every bastard can get the f**kk out of the way.

See what i mean buddy,,,natsoft lied again hey,,,no way would a 2wd car beat a 4wd or is that twice you have been owned ?.

Love and kisses as always

Neil.

You need to re edit the broken down video so i can see myself finally passing you. You cut it as my 32 comes into the mirror haha. I know why check out the passenger foot well on both videos. Your haltech control unit plate comes loose and is dallying around in the footwell

Look, that will be enough of this gtr love-in crap. Rubish cars driven by rubish drivers. Was that another 2wd coming home in 3rd,,,nice work Mr Milano and a VERY big congrats to Mr Wootten.

Pete, I don't know if you are awhere but there is a "Secret GTR owners club", and in there constitution rule 7 subclause 8a it states that if a GTR owner gets beat 3 times by rear drive Skylines then the club will remove the car from said owner. Tread carefully buddy you are on your last chance.

HA HA

Neil.

  • Like 2
  • 4 weeks later...
  • 2 weeks later...

Yea if your read the Internet the world will end with a stock oil pump

Shame the Internet is full of f**k stains that drag race..... I don't drag race

Ps if I was building a engine I would use a flashy pump

It's only the engine that have had the Nissan let out that need new flashy pumps

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...