Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 months later...
  • 1 month later...
  • 4 weeks later...
  • 2 months later...

Tune only running 23psi (boost controler off) made 470kw's

Ran out of legg 3 weeks ago 10.5 @139mph 1.9 60ft

Has a r32 gtr rear 4.11 ratio

So i got a silva diff that has 3.7 ratio and put my gtr center and half shafts in it and it works!!...home job coz no money....

Took to the drags last nite ran a 10.2 @141mph 1.9 60ft (got off the throttle off transbrake see the log)

Also wired up a switch to the link g4 for a log

Afted seeing intake temps sould think about upgrading me intercooler (justjap coolingpro 75mm thick)

Coming upgrades

Emtron egt modules and egt cuplings

Hypertune 600/300 100mm thick intercooler

TI 5bar map sensor

More boost

Buildnotbought

post-88690-14479055325066_thumb.jpg

post-88690-1447906214243_thumb.jpg

  • Like 1
  • 3 months later...
  • 4 weeks later...
  • 4 weeks later...

No one is to blame accidents happen

Thats life

Droped my car off at the start of january i droped my car in for a tune the person was moving it in the car park when the dip stick got court in throttle body couldnt stop the car and damaged the rear badly (driver hooked it to save the front leagend!!) Turns out dip stick poped out the block 3yrs owning it never had a problem oh well.tuner was very helpfull with sorting it out via insurace top bloke!!! .got a payout keeped the car the end

Found a red r32 gtst for $2000 no rego . stock rb20 with rb25 gearbox convertion

Justs need new front gaurds,gtr bonnet and front bar (which i am after) and a spray job

ef4bd9641c2ffc1bd9731c6b045a09d6.jpgfb3aaabaa66d3608e839fa85bc4fad0c.jpg

Today started started to stipped the motor etc ready to put my running gear in

Upload pic soon

Edited by D.s
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...