Jump to content
SAU Community

Recommended Posts

Hi all,

Im looking at buying a cheapish project soon. I've found something I like but its in SA.

The car is currently registered there and it had its compliance done there also last year.

Basically I just want to know if its just a matter of me getting a rwc here in Vic and then rego or if because its not an aussie delivered car if I will have issues with complaince related stuff.

I have heard its pretty straight forwared buying an intersate car but thought I'd ask just incase.

Cheers.

you will also need to present the car to vic roads for a visual inspection, which will mean booking an appt at a location that can do that - you can't just present the RWC and pay the stamp duty and transfer as per a previously vic rego'd car. Other than that it is straight forward.

Have a look at CEVA for transport rates. I got a car from Syndey to Melbourne, depot to depot on a CEVA truck for 160 last year.

you will also need to present the car to vic roads for a visual inspection, which will mean booking an appt at a location that can do that - you can't just present the RWC and pay the stamp duty and transfer as per a previously vic rego'd car. Other than that it is straight forward.

I believe that is incorrect. I did a car from NSW a while ago (3 years), and because the car was unmodified from original rego - basically original engine / chassis / VIN numbers - it wasn't necessary to have it inspected. Just take the old plates and a RWC to a Vicroads office, and pay the appropriate fees.

That may be the case if the vehicle was already registered in your name in the other state. Vic roads says you need to do all the the things you do and that in some cases a RWC is required - and to call for details. Clear as mud! <br /><br />All I know is that last year I bought a car from Sydney. To get it registered in my name I had to a)get a RWC b) book an appointment for inspection c) the inspector asked me to bring the vehicle round to inspection bay to check numbers. <br /><br />It was a 2008 Mazda MPS with no mods, so not like the kind of car to raise alarm bells. I remember all this clearly as it was around the time all the hail damaged cars were getting VIVs and every inspection center was booked out for 3 weeks - so I had to drive to ballarat to get a slot.

So his easiest shotnis t get it registered in his name in SA, keep it that way for awhile, then rego transfer?

You any register a car in a state you don't live in, and it's an offense to own a car registered in another state when you reside in another.

Basically car must be in your name registered in the state you live in.

And how would they know when you can just easily go to your bank, change your address to your mate's place, and tell the vicroads or equivalent there that you're there temporarily to find a job/internship and would like to register the car you just purchased in your name there.

If its registered in SA, and the VIN and engine no. match up with Vicroads, then you just need to make an appointment to get new plates and rego and also hand in the RWC. If the VIN and engine no. dont match up, you'll be asked to bring the car in for an inspection. You can find out exactly what scenario you have to deal with by calling vicroads and quoting the engine no and VIN to them. I am in the process of doing it now. Lucky for me, everything matches up so they don't need to inspect my car :)

I believe it's fairly straight forward if the car is stock as a rock. We got a heavily modded car from Sydney which needed an engineers certificate and that was a nightmare and a half (it didn't help that it didn't have a vin number and had to go through the stolen vehicles unit for verification prior to be registered)

I would not use CEVA transport, they are rotten to deal with and their staff are unprofessional and rude. I organised for my car to be carried from Melbourne to Brisbane in December. I booked, paid and provided all the measurements they required plus more to make sure my baby was carried safely, get to the depot after driving 150kms and was told it was going to be an additional $300 because a mistake made by their staff member and that it would take another 9 days.

Called around frantically and found another company who was going to do it $200 cheaper than the original company, carried my car in a covered truck and even gave her a wash before I picked her up. On New Years Eve. http://www.prixcartransport.com.au/move-my-car/

it's an offense to own a car registered in another state when you reside in another.

Basically car must be in your name registered in the state you live in.

hmmm don't know where you got that from

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...