Jump to content
SAU Community

Recommended Posts

hi, got some r32 and r33 engine parts for sale. also some rb30.

stock sII rb25det injectors and fuel rail $100 neg

rb30 fuel rail

r34 rb25det neo intake manifold complete

r34 rb25det neo rocker covers $60

r33 series 2 rb25det standard turbo $220 or $240 with turbo manifold

r34 rb25 neo engine cover bracket (neo specific) $10 or free with neo rocker covers

rb30 rocker cover $20

r34 rb25det neo front cam cover $30

r34 rb25det neo cam backing plate $35

rb25det bare lower intake manifold runners $15

rb20det crossover pipe with factory blow off valve. $50 or $20 without bov.

rb25det crossover pipe $50 or $20 without bov

rb30e crossover pipe $35

rb20det stock bov $30

rb25det stock bov $30

rb30e 3EA ecu x $50

rb30 auto box AT1 ecu $30

rb25det aircon compressor bracket has been sandblasted $20

rb25det non hicas p/steer pump $100

rb30e na camshaft gc $30

rb30 starter motor x2 $70 each

rb20det starter motor $60

rb30 stock cam gear $10

rb25det stock cam gears $20

rb25det p/steer reserviour $15

rb25det polution canister $20

rb25det dump pipe elbow $15

rb20det dump pipe elbow $15

rb25det alternator $80

used rb25det oil pump $20

rb25det stock turbo exhaust manifold x2 (also fits rb20det) $50 or $20 if you buy the rb25 turbo as well.

rb20/25 turbo exhaust manifold heat shield $10 or free with exhaust manifold

rb25det p/steer pump brackets $20

rb30 sump $20

stock r33 rb25det intake pipes/hoses

CALL 0433 559 722.

Link to comment
https://www.sau.com.au/forums/topic/424016-r32-r33-gtst-engine-parts/
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...
  • 1 month later...
  • 3 weeks later...
  • 3 months later...
  • 2 weeks later...
  • 1 month later...


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...