Jump to content
SAU Community

Anyone Had This Problem With R33 Gtr

fletch63

By fletch63,
in Engines & Forced Induction

 Share

Recommended Posts

fletch63 Collaborator

fletch63

Posted
Posted

Hi all,

Just a small annoying problem with my baby

When driving I get a total "miss" every once in a while

It's like engine stops for a millisecond and then continues fine

I have tried to find a pattern but there doesn't seem to be any

Can be any speed, any gear, just random

I am thinking maybe fuel pump?

Any ideas

Ishman Enthusiast

Ishman

Posted
Posted

Hey mate mine does this too, usually when I've backed off the throttle at low revs then as I start to build revs again can get a miss. Only in 3rd or 4th though, and not very often. I thought I read somewhere on here that it was a common thing for RB26s so I wasn't too worried; car runs great otherwise :)

djr81 Grand Master

djr81

Posted
Posted

Hi all,

Just a small annoying problem with my baby

When driving I get a total "miss" every once in a while

It's like engine stops for a millisecond and then continues fine

I have tried to find a pattern but there doesn't seem to be any

Can be any speed, any gear, just random

I am thinking maybe fuel pump?

Any ideas

Are you by any chance running a Power FC?

Brandon Veteran

Brandon

Posted
Posted

No its with the ecu itself I think. Not much you can do about it. Apparently some people doesnt have it but most do, Some tried checking the earth/ground but doesnt really solve it issue.

I have that issue too and its mostly during cruising. I was told by reputable tuners that it is common will not cause any issue.

fletch63 Collaborator

fletch63

Posted
  • Author
Posted

No its with the ecu itself I think. Not much you can do about it. Apparently some people doesnt have it but most do, Some tried checking the earth/ground but doesnt really solve it issue.

I have that issue too and its mostly during cruising. I was told by reputable tuners that it is common will not cause any issue.

Thanks Brandon

That puts my mind at ease

Was wondering what would happen if it "missed" at WOT at 8000 revs.

It seems to only happen (or I notice it) at cruising revs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      eBay "Hella" oil level sensor

      By PranK · Posted

      Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...