Jump to content
SAU Community

Recommended Posts

Saw a guy with a varex dosing down the road into the servo. Sounded awesome fully opened. I complimented his car and he said it was a 3.5 inch inlet into a 5 inch cannon. He closed it and it was dead quiet...probably less than stock. He said he pulled 320 on the dyno and had cams. I might look at this option shortly.

Just had a quick look at the Varex and it's 3.5" OD, which is not too bad, taking a stab the the wall thickness of the pipe would be 2mm or less, you're left with approximately 85mm or approx 3.3" ID which is still some difference from the

run of the mill 3" exhausts. Would be great for temporarily deterring the wrong kind of attention!

Just had a quick look at the Varex and it's 3.5" OD, which is not too bad, taking a stab the the wall thickness of the pipe would be 2mm or less, you're left with approximately 85mm or approx 3.3" ID which is still some difference from the

run of the mill 3" exhausts. Would be great for temporarily deterring the wrong kind of attention!

Spoke to a few varex exhaust installers and they recommended not going down that path. They said the 3.5 inch canon had inherent issues when closed. They said when fully closed when cruising or in peak hour traffic, they became very hot because the gases were diverted through the muffler 3 times before the were expelled and they recommended that you would have to continually open and close the valve to help it cool down. This heat issue was causing overheating and failure of the valve motor. The larger oval type muffler did not have this problem. So I suppose it best to stay away.

I finally found the courage to comp test this engine. Turns out it's not TOO bad but definitely could be better.

155, 155, 160, 153, 153, 148.

No 6 gets me a little worried, might ask Trent to keep that cylinder nice n rich when it gets tuned.

Is that a huge issue? I thought it was only if it was around 10% out or so.

Mine came back as 155,150,160,150,155,155

Not a huge issue, 148 is getting pretty close to 10% though. Even so, as long as I take care driving it until I have money to get it tuned, should pose no problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...